Shear-hydraulic Ermaksan HGD, HGS Turkey

Advantages
After entering the metal thickness, length of cut and type of material – there is an automatic setting of the backgauge, the clearance between the blades of the knives, the length of stroke and cutting angle.

Automatic adjustment of the cutting angle depending on the thickness of the material allows to work short working strokes when cutting thin sheets. This allows to increase the number of cuts per unit time, furthermore, reduces the twisting of the cut strips.

Standard package:

Rear focusing with a maximum stroke of 1000 mm;
The pressure cylinders, an anti-slip sheet (14 PCs)
Controller Cybelec Dnc 61G:

Automatic adjustment of blade gap, cutting angle and the length of the stroke depending on the type and thickness of material;
The adjustment of adjustable parameters for 5 types of materials;
Automatic departure/approach of the backgauge during cutting;
Automatic setting of the backgauge in size depending on the clearance between the knives;
Repeated and consistent execution of programs, organization of routines and a chain of programs;
Digital LCD screen with automatic contrast adjustment;

Ball transfer units on the table;
Honed body and chrome-plated piston of the hydraulic cylinder;
Solid knives: the bottom – with 4 cutting edges, top with 2 cutting edges;
Hydraulic system of setting of the gap between the knives;
Hydraulic system Bosch-Rexroth;
Noiseless hydraulic high-pressure pump Atos;
Front caliper suspension struts;
Foot control (for single and continuous cutting);
Highlighting the cutting line;
Throat depth – 350 mm;
Security system;
Movement of the back stop provided by the screw ball pairs (positioning accuracy 0.1 mm) and guides;
If necessary, cutting the leaves of a width exceeding 1000 mm, the back focus can be automatically folded.
In the process of cutting the backgauge can realize a departure/approach, to prevent deformation and jamming the narrow lanes.

Prices and terms of delivery specify at the request.