OPTImill MB 4 milling machine for metal frezerny verstat Optimum tapping optimum MB 4
Offer type: salePublished: 22.10.2019
| Price: | 2 741 EUR |
| Company: | Stanok.org - internet-magazin stankov |
| Seller: |  stanok.org stanok |
| Phones: |  +380981500024 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
OPTImill MB 4 (optimill MB 4):
Price and availability check on the website the Machine org, or by phone
Mode threading
Reliable desktop milling machine for metal OPTImill MB4 with a manual gearbox and rolling rifled functions.
Massive cast iron body and base of milling machine, designed for the perception of large loads.
The massive table is made with precise geometry and low roughness.
Desktop milling machine for metal OPTImill MB4 has a wide range of rpm of spindle 95 — 3200 rpm.
High-quality roller-bearings provide radial spindle runout less than 0.015 mm.
Timing mechanism of the spindle is placed in an oil bath.
Brushed and Sobranie guides-type “dovetail”, are governed by the wedge bars.
Desktop milling machine for metal OPTImill MB4 has two modes of feed of the quill: rough and accurate micrometer.
Mode threading — automatic retraction when changing the direction of feed of the quill.
Swivel ± 60° milling head is capable of operating in any intermediate position.
High performance and efficient 2-speed induction motor.
Right-left rotation of the spindle.
Adjustable screws on all chassis screws allow you to completely eliminate backlash.
Protection guides from chips.
The protective screen is large in size with a limit switch.
Adjustable stops moving the table easy to read measuring scale on front table.
Technical characteristics of the OPTImill MB 4:
Power Supply 380 V ~50 Hz
The electric motor 1,1 / 1,5 kW
Maximum drilling diameter in steel 32 mm
Maximum drilling capacity in steel 28 mm
The maximum diameter of the end mill 63 mm
The maximum diameter of the end mill 28 mm
Rpm of spindle 95 — 3200 rpm
Number of speeds 2 x 6
The end of a spindle MK 4
Quill travel 120 mm
The swivel of vertical milling head ± 60°
The departure of the axis of the spindle 275 mm
Table size 800 x 240 mm
The size of the T-slot 14 mm
The distance between slots of 63 mm
Axis travel X 450 mm
Axis travel Y 200 mm
The Z-axis travel 430 mm
Length 760 mm
Width 850 mm
Height 1150 mm
Weight 320 kg
Operating mode "Threading" OPTImill MB 4:
The engine is activated when you move the lever tailstock down.
When the desired depth is reached, the direction of spindle rotation is reversed.
Tap out of the workpiece.
When the tailstock is fully dedicated to the point of switching, the spindle rotation stops.
The package OPTImill MB 4:
The Morse taper MK 3
Adapter MK 3 - MK 4
Drawbar M 16
working tool
All machines have a warranty period of 1 year, provide services for warranty and post-warranty service.
