Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  construction methods, handling machinery

Wire PNSV-1.2 for heating the concrete and soil

Offer type: salePublished: 28.02.2015
Company:ChP Promsoyuz
Seller:Andrej Valentinovich
Phones:
Show phone
Write a message
Address:Kyiv, Ukraine, Kyiv Oblast'
Wire PNSV-1,2 - cable-conductor products, which is designed to heat the concrete by fixed laying in the volume of heated concrete. The wire consists of steel wires and insulated with polyethylene film. Operational characteristics: Wire warm-up PNSV hours for the change of ambient temperature: from -60 to +50 C Maximum operating temperature: +80 C The wiring must be carried out when the ambient temperature is not lower than -15 C. Wires are resistant to water and 20% aqueous solution of sodium chloride or 30% solution of alkaline CA(Oh)2 or NaOH. The bend radius of the wires during installation must be: at least 5 external diameters. Minimum bending radius: 25 mm