Drainage vortex pumps (Italy).

Drainage vortex pumps, centrifugal type S-series "Victor Pumps (Italy) are designed for pumping dirty water, pumping and draining in construction or emergency work. Vortex pumps S series are self-priming, pump liquids with solid particles and with the presence of air pockets in the stream. The advantages of vortex drainage pumps: • Simple design, the impeller is the only moving element • Special holes for inspection of the working chamber, sludge removal and Gulf liquids • Self-priming ability. The pump is filled in automatically when working, at the height of the liquid column up to 7.5 m • Resistance to hard and abrasive inclusions • Easy installation, no need for the intake valve, the pump can be installed in an easy to service location • Pumping chemically aggressive liquids • External lubrication of the mechanical seal • Long service life and easy replacement of depleted nodes Specifications vortex drainage pumps S series The size of the pipes inlet-outlet DN 40 ...DN 300 (1 ½ ” ...12”) Performance of 1 440 m3/h Head up to 60 m C. C. The depth of the liquid lifting 7.5 m Vortex horizontal centrifugal pumps S series with semi-open impeller are designed for pumping liquids with a viscosity of not more than 50 cSt, but with a high content of solid inclusions with a diameter up to 76 mm The pumps in this series can pump large soft inclusions, such as pieces of fuel oil, paraffin, various cloths and fibers. In case of clogging, you always can easily clean the pump, through simple and easy access to the working chamber. Great choice of mechanical seal allows the use of pumps for pumping of corrosive and abrasive environments. Vortex pumps S series can be made of cast iron or stainless steel. Examples of the fluid: • contaminated water • waste water • blurred deposition of oil tanks and tanks • paper weight • kerosene.