The drive screw motor 1 MVP.M
Price: | negotiated |
Company: | OOO ' Kompani Plazma' |
Seller: | Aleksandr |
Phones: | +38 063 12 45 771 Show phone |
Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
The actuator screw motor MVP.1M intended for control mechanisms with mine reciprocating and oscillating movement, which when power off should be fixed in the stopped position. The drive is a compact mechanism, which combines: motor, helical gearbox a movable rod and limit switches enclosed in hazardous the sheath. The actuators are designed to operate in mines dangerous explosion of gas and dust that require the use of electrical equipment in the mine, explosive performance, and on the surface.
Can work in conditions of cold and temperate or tropical climate with:
- the temperature of the surrounding air from -50 ° C to +45 ° C;
- relative humidity air from 35% to 100%;
- dust environmental environment up to 1600mg/m3;
- vibration installation locations with a frequency of from 5 to 120Hz with a maximum fibropurulent 0.25 mm at a frequency of to 45Hz and maximum Vibroscreen 20m/s 2 at a frequency of from 45 to 120Hz;
the voltage deviation from the normal within 0,85-1,1.
Climatic version: UHL 2, 5 for moderate and cold climate; T 2, 5 for the tropical climate. MVP.1M(200 x 200)-A; MVP.1M(200 x 350); MVP.1M(600 x 250); MVP.1M(600 x 400).
Specifications
Parameter Value
The force on the rod, N:
- A 2000
- B 2000
- C 6000
- D 6000
Stroke, mm:
- A 200
- B 350
- C 250
- D 400
Movement speed rod, mm 77
Power consumption, W:
- A 1100
- B 1100
- C 2100
- D 2100
Rated voltage, V:
- motor 380/660
- the control circuit 36
The enclosure protection R
The level and type of protection PB,3B