The pressure gauge overpressure dead weight MP-600 accuracy class 0.05

Dead weight pressure gauges are the most accurate and stable devices gives better repeatability of measurement results. The pressure gauge overpressure dead weight MP-600 accuracy class 0.05 ( further under the text - gauge) is used for verification and calibration pressure measuring devices (strain gauges, sensors, recorders and so on), as well as direct measurement of gauge pressure in connected systems.

Designation

Name

The number

Note

MCDS.406141.005

Column dead weight measuring

1

MCDS.306444.047

Press gauge MP-600

1

The set of goods that fit nominal the pressure value:

MCDS.301313.088-03

1 MPa or 10 kgf/cm2

4

MCDS.301313.089-04

5 MPa or 50 kgf/cm2

11

MCDS.711111.009-04

Load additional

1

Comes with the order with a double set of goods (in MPa kgf/cm2)

Fitting with thread:

MCDS.715182.043

Outer M20x1,5 Internal MH

2

MCDS.715182.041

M20x1,5 M12x1,5

2

MCDS.715182.042

M20x1,5 MH,5

2

Shims under the fitting:

MCDS.754176.185

ø 11

20

MCDS.754176.186

ø 18 / ø 6,5

20

MCDS.754176.187

ø 8,8

20

MCDS.715182.048

Fitting MH/MH

1

MCDS.711141.015

Gasket ø 20 / ø 12

1

GOST 3722-81

Bulb ø 7,541-40

1

MCDS.406141.008

Level

2

MCDS.406141.010 ER

Manual

1

MCDS.406141.008 FL

The label on the level

1

MCDS.306444.047 FL

The label on the press gauge MP-600

1

Comes when ordering press gauge MP-600 without the column dead weight

Calibration certificate

1

Technical characteristics of the manometer comply with GOST 8291-83

Specifications

Name parameters

Norm for pressure gauge

The upper limit of measurement, MPa (kgf/cm2)

60 (600)

The lower limit of measurement, MPa (kgf/cm2)

1 (10)

The nominal value of the square of the piston cm2

0,05

The nominal value of the mass of the piston with the intake device, kg, not more

0,5 x 0.98

The pressure created by the piston driving device, MPa (kgf/cm2)

1 (10)

Overall dimensions, mm, not more:

length - 1070;

width - 550;

height - 770.

The mass of the gauge , kg, not more 117,1

Limits acceptable basic error

At pressures from 10 to 100% of the upper limit of measurement

At a pressure of up to 10% of the upper limit of measurement

± 0.05% of the value of the measured pressure

± 0.05% of from 0.1 upper limit of measurement