Press gauge MP-60M class. so 0,02
Price: | 1 UAH |
Company: | ChP 'AVITEH' |
Seller: | Sergej Dmitrievich |
Phones: | (067)473-12-22 Show phone |
Address: | Ukraine, Cherkas'ka Oblast', Cherkasy |
Press gauge MP-60M class. so 0,02
Designed for transmission of pressure units: dead weight pressure gauges accuracy class 0.02 and 0.05 hydrostatic balance; means measuring equipment overpressure accuracy class 0,075; 0,15; 0,25 direct comparison.
- The upper limit of the measurement, MPA (kgf/cm2) - 6 (60)
- The lower limit of measurement is 0.1 (1)
- The minimum area of the piston, cm2 - 0,5
- The permissible error gauge, in % of the actual value of the measured pressure:
- basically the range from 60 to 600 kPa - +/-0,01 +/-0,02
- in additional the range from 40 to 60 kPa - +/-0,01 +/-0,02
- Overall dimensions, mm, not more:
- length - 500
- width - 500
- height - 600
- The mass of the gauge without cargo, kg, not more - 20
- Powered by AC:
- voltage - 220
- frequency, Hz - 50
- The working fluid - transformer
oil
according to GOST 18121-76
Press gauge MP-60 class. so 0,05
Purpose :
- Press gauge MP-60 ( press) is designed to create positive pressure and in the presence of an exemplary measuring funds may be used for verification of working measuring pressure.
- The press is designed for operation at ambient temperatures from 10 to 30°C and relative humidity less than 80%.
- Accuracy class exemplary pressure gauge used in the press as a means measurement is selected in accordance with the rules of Metrology and depends from class precision test pressure gauges.
Specifications:
Option
Value
The working fluid
Transformer oil GOST-982 or GOST-10121
The greatest produced by pressure
6 MPa (60 kgf/cm2)
Overall dimensions, mm, not more
750 x 440 x 300
Weight, kg, not more
43
Legend:
1 - Bed 2 - Hour Central 3 - Gauge reference control 4 -
Capture left 5 - Capture the right 6 - Pump manual 7 - Valve tank 8 -
Gidropress 9 - Feet 10 - Screws regulirovanie