PTFE rods in 8mm, 10mm, 13mm, 15mm, 20mm, 25mm, 30mm,35mm, 40mm, 45mm, 50mm,60mm, 65mm, 70mm

PTFE rods in 8mm, 10mm, 13mm, 15mm, 20mm, 25mm, 30mm,35mm, 40mm, 45mm, 50mm,60mm, 65mm, 70mm

Key indicators fluoroplast-4:

The density 2140-2400 kg/m3

Working range temperature-269 to +260°C

The melting point +327 °C

Water absorption for 24 hours of 0.0%

The coefficient of friction on 0,04

Chemical resistance: resistant to all mineral and organic acids, alkalis, organic solvents, oxidizing agents and other aggressive environments.

Features PTFE:

PTFE has 4 extremely high chemical resistance (this is due to high screening the effect of electronegative atoms fluorine), as well as resistance to all mineral and organic acids, alkalis, organic solvents, oxidising agents, gases and other aggressive Wednesdays.

Destroy the polymer is able to only melt alkaline metals, elemental fluorine and boron TRIFLUORIDE chlorine at high temperatures.

PTFE has 4 the ability to not water wettable and not be exposed to water when the long-term test.

This material demonstrates exceptionally high dielectric properties due to polamolu polymer.

PTFE has exclusively a low coefficient of friction. The main advantage of the seals from fluoropolymer compositions compared with products from steel, bronze, cast iron, graphite and other materials - the ability to operate without lubrication. Thanks they can be used where the presence of lubrication is undesirable to install in remote places, where care and lubrication is difficult or impossible.

The material is resistant to aging under normal conditions, warranty term preservation of quality indicators more than 20 years.