Ball valves for natural gas BALLOMAX
| Price: | negotiated |
| Company: | TOV 'Torgovo-promyishlennaya kompaniya 'Tehnoprom' |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +38 (96) 8897777 Show phone |
| Address: | Ukraine, Kyiv |
Basic parameters:
DN: 10-500
Ru: up to 40 bar (depending on DN)
T: -30 C to +90
Drive: manual, electric, portable
Spindle: Standard, high (for insulation), Long (for installation in hard-to-reach pipes)
Seals: Saddle-Nitrile
Ball: Stainless Steel. The steel. made with a minimum tolerance of roundness after grinding varies only by a few microns.
The cranes are made from carbon steel with threaded connections, welded and flanged, as well as with all kinds of combinations of the above compounds. Special valves are produced according to customer's requirement.
Taps for tapping into the heating system under pressure
Main parameters:
The valves are intended for use with pipelines
DN 15-100
Cranes "Ballomax" for hot water outlet provide a simple and cheap box of new customers in existing systems heat.
Procedure insertion does not cause problems:
* Removes the lining of the pipe in the place where you want to dig into the system;
* Crane of this type is welded to the pipe in the open position;
* Device for insertion is mounted on a welded crane by means of the coupling;
* Is drilling, and the water is discharged through the drain valve;
* After drilling, the drill is given in the extreme position, and the valve is closed, after which the device is dismantled.
Now a new user can be easily attached to the system.
For DN 65-100 in the set has an additional gear
