Power thyristor FC-0620,FC,phthalo 0620

Power thyristor FC-0620 designed for contactless control of electric actuators, actuator using three-phase motors. Provide start reversing synchronous motor from overload. No security.


The main parameters of the FC-hte signal pulses 2 half-cycle rectified sinusoidal voltage (24±6) with continuous variation of the duty cycle;
- the status of the contact or contactless keys.
The input impedance of the amplifier 850 Ohms
Maximum switching current 4 a
Performance 50 MS
The difference between the durations of the input and output signals of no more than 20 MS
The mode of operation intermittent reversible with switch frequency up to 630 per hour at on-time PV 25%.
The voltage supply control circuits 22-26 (the average value of the full-wave rectified current)
The average failure (MTBF) of 100,000 hours
The full service life of 10 years
Degree of protection IP20
Power supply 220 / 380V, 50 Hz
Power consumption not more than 10 W
Weight not more than 7 kg




Name phthalo-0610 FC-0620
The main functions of the Control mechanisms IER, with 3-phase motor. Start, reverse motor (synchronous or asynchronous), the brake and overload protection induction motor, alarm about the failure Management mechanisms IER, with 3-phase motor. Start, reverse the motor.
Input signals 1) pulse 2 half-cycle rectified sinusoidal voltage (24±6) with continuous variation of the duty cycle;
2) changing the state of contact or contactless keys;
Input Circuit (disconnection) of the output contactless keys. Maximum switching current - 4A per phase 3-phase AC voltage.
Degree of protection IP20
Dimensions, mm Hg HH
Weight, kg 7