Welding inverter SSVA-Mini "Samurai" 160A

Welding inverter SSVA-MINI "SAMURAI"

Multifunction current source inverter type SSVA-mini "Samurai" would be:

• a constant current source for high-quality manual arc welding (MMA);
• the pre-charger for 12V car batteries;
• the constant current source in the equipment for semi-automatic welding with mechanical feed of welding wire (MIG/MAG) (option);
• the constant current source in the equipment for welding with a nonconsumable tungsten electrode inert gas with contact ignition of the arc (TIG)(option).

 

!!! The attention. Always consult your dealer or service centre of the manufacturer (hereinafter "SC") for the use of the device in modes MIG/MAG and TIG.

 

The use of inverter technology with microprocessor control parameters arc provides the following advantages:

• high power with small size and weight;
• exceptionally high power settings;
• stable welding parameters on any values of welding current;
• stable arc, independent of fluctuations in mains voltage (165 - V);
• mode MIG/MAG comfortable welding thin metals;
• control system input voltage allows you to protect the device against overvoltages up to 300V;
• function Antiprolifera" (automatic reduction of the welding current if the electrode sticks);
• high availability, reliability and maintainability of the apparatus SSVA;
• the ability to increase functionality, improve consumer properties by updating the software (firmware) of the microcontroller.

Package contents:

• SSVA-mini "Samurai" - 1 piece
• Cable with clamp mass ABICOR BINZEL - 1 piece
• Cable with electrode holder ”ABICOR BINZEL” - 1 piece
• Instruction manual - 1 piece

Option

The value for SSVA-mini "Samurai"

The nominal supply voltage, B

220V

Working power supply, B

165 - V

Operating temperature range environmental

-30°C TO +45°C

Power consumption (household AC 220V,16A), W

no more VT (12A)

Power consumption (household AC 220V,16A), W

no more VT (16A)

Power consumption (industrial AC 220V,25A),W

no more VT (25A)

Power consumption idle, W

no more than 35W

The range of adjustment, And

5-160A

Constant load (MO) under normal conditions, not less than

up to 130A - 100% 160A - 45%

Efficiency, not less

87%

The diameter of the electrodes, mm

the 1.6-4mm

Diameter of wire, mm

0.6-0.8 mm

The adjustment range of the output voltage, the mode MIG/MAG,

12,4 - 25,4

Insulation resistance at voltage of 2.5 KV, not less

Mom

Dimensions LxWxH, mm

HH

Weight, not more, kg

5.5 kg