Welding machine SSVA-270P

Welding multifunctional machine inverter type SSVA-270P.

Multifunction current source inverter type SSVA-270-R can serve as:

a constant current source for semi-automatic welding with mechanical feed of welding wire 0,6 - 1,2 mm shielding gas (MIG/MAG);

a constant current source with adjustable tilt WAH for manual arc welding (MMA) with coated electrodes 1.6 - 6mm with any type of coating and current output up to A;

a constant current source in the equipment for welding with a nonconsumable tungsten electrode inert gas with contact ignition of the arc (TIG).

The use of inverter technology with microprocessor control parameters arc provides the following advantages:

high power with small size and weight;
exceptionally high power settings;
stable welding parameters on any values of welding current;
stable arc, independent of fluctuations in mains voltage (165 - V);
mode MIG/MAG comfortable welding in a wide range of welded thicknesses of metals;
aluminium welding wire 1-1,2 mm mode MIG/MAG inert gas (argon);
control system input voltage allows you to protect the device when network 380V;
modes "Hot start", "Forced arc", "Antiprolifera" facilitate the work in hard to reach places, allow welding even for beginners;
intelligent control system provides maximum cooling coefficient constant load (MO);
the system reset circuit voltage, allows for safe welding operations in wells inside the vessels in wet areas;
high availability, reliability and maintainability of current sources SSVA;
the ability to increase functionality, improve consumer properties by updating the Software of the microcontroller.

Standard delivery:

The current source inverter type SSVA-270-P - 1 piece
Cable with clamp "Weight" "ABICOR BINZEL" - 1 piece
Cable with electrode holder "ABICOR BINZEL" - 1 piece
Sleeve for welding mode MIG/MAG - 1 piece (RF GRIP 25)
Instruction manual - 1 piece

Specifications:

Rated voltage 220V
Operating voltage supply, 165 - V
Or equivalent resistance of the network, no more than 4ohm.
The range of output currents, 5 - A
The mains supply 220V 70A.
The operating range of ambient temperatures -30°C To +45°C
-There are no principal limitations for work and at lower temperatures.
Power consumption (household AC 220V 16A), not more than 2.7 kW (12A)
When the DC output current up to 110A.
Power consumption (industrial network 220V 70A), not more than 5.5 kW (25A)
When the DC output current up to 160A.
Power consumption, W (industrial network 220V 70A) not more than 16.0 kW (65A)
When the DC output current up to 300A.
Power consumption, watts idle, no more than 40W
The maximum short circuit current, AND ~A
Constant load (MO) under normal conditions:
160A - 100%
A - 60%
A-45%
Efficiency of at least 88%
cosφ 0.67
Wire feed speed, mode MIG/MAG, m / min 0,3 - 16
The upper limit of speed depending on the voltage. It is possible to work up to 15 meters per minute.
Recommended wire diameter, mode MIG/MAG, mm 0,6 - 1,2
The adjustment range of the output voltage, the mode MIG/MAG 10.0 - 29,0
Insulation resistance at a voltage of 2.5 KV, not less mom
Model - mom
Dimensions LxWxH, mm Hg
Weight, kg 19,4 kg