Analysis of oil and grease, TOR-105 "Diagnostics of machines and mechanisms. Tribology"
| Seller: |  Romanov Roman |
| Phones: |  (056) 785-39-60 Show phone |
| Address: | Kyiv, Ukraine |
Analysis of oil and grease is one of the most effective types non-destructive testing for the diagnosis of dynamic equipment, as the condition of the grease depends on the duration of operation of the machine and its of nodes.
Assessment of quality lubricants should be as during equipment installation and startup, operation, maintenance and service and repair. Pollution (soot, fuel, water, mechanical impurities), degradation and wear of the mechanical parts of the mechanism change the properties of the oil and smash, sacrificing quality and reducing the service life of the mechanism.
Periodic quality control of lubricants allows to increase the reliability of the units, to reduce the cost of late change the oil and failure of equipment.
Oil ahead of time had lost its protective properties capable of several times to increase the speed of engine wear and bring him, eventually, to the breakdown. To detect changes in the quality of oil and possible pollution, it is necessary to conduct periodic monitoring of oil.
So so urgent is the question of how to check the oil used in the equipment. This question can be divided into two categories, which can be solved in a different way. The first category is how to check the oil, which is poured? And the second is how to check the oil already used in the car?
BALTECH offers to Your attention a portable the oil analyzer BALTECH OA-5000, and minilab different level and depth of analysis series BALTECH OA.
