Title: BALTECH OA-5000, control oil, check oil, diagnosis lubricants

The oil analyzer BALTECH OA-5000 is designed to monitor oil condition by measuring changes its electrochemical performance due to pollution, the oil degradation and wear mechanisms. Knowledge of these changes allows the user to increase the interval between oil changes, to detect increased mechanical wear and deterioration of the lubricating properties oil. This effect is particularly evident in motor oils, but also observed in gear and lubricating oils. Diagnosis of lubricants and control oils are one of the most effective methods of nondestructive testing.

The cause pollution oil is often oxidation and the formation of acid. This happens in normal operation of the engine and manifests itself as a gradual improve measurement results for some period of time. Other reasons the pollution is the increased wear and mechanical damage, such pollutants like soot, fuel, water, antifreeze and metal particles. These pollutants make a noticeable growth of the readings, resulting in the device gives warning of the likely failure of the equipment due to the oil pollution.

As the analyzer oil BALTECH OA-5000 measures the change in dielectric properties used oil compared to net first analyzer should to calibrate for the pure oil of the same type as studied. Then directly analyzing interested in oil.

The oil analyzer BALTECH OA-5000 is a portable kit in case enables the analysis of the oil for 2 minutes and can be an alternative long-term laboratory studies.

For testing analyzer calibrated net oil and further compares the performance clean and oil used: fixed changes in used oil compared to a net source.

Specifications

Types of tested oils

Mineral and synthetic oils

Repeatability

Better than 95%

Display

Color (green/red) + numeric value from -999 to +999)

Display resolution

HI: 1
LO: 0.6

Battery

9 V, Alkaline, IEC 6LR61

The battery life

150 hours or 3000 tests

Dimensions

250x95x32 mm (9,8x3,7x1,3 inch)

Weight

385 g (14 oz)