Heater for coupling, inductive heating of the gears, BALTECH HI-1612

Induction heater for couplings and bearings BALTECH HI-1612 - a unique design, without analogues. Has two built-in magnetic inductor (core) in one the case, which makes it possible to heat the two parts simultaneously. This model developed by BALTECH for serial production and conveyors, where necessary inductive heating of the two gears or bearings during Assembly. Used for heating parts weighing more than 12 kg and the maximum outer diameter D 210 mm.

This induction the heater has two built-in magnetic inductor (core) in one the case that distinguishes our development from all available induction heaters on the market. This induction heater has a power 220V, easily replaceable fuse and a small power consumption that makes it available for General use. In control panel, induction the heater has an indicator showing the current (specified) temperature heating, which is controlled by a temperature sensor with feedback on off when the preset heating (sound signaled the buzzer). If the induction heater heats the item (bearing, clutch, ring or cog) time, and temperature, it will keep the regime even if You forgot to turn it off. Unlike homemade induction heater all our models have the function demagnetization after heating parts. The induction heater BALTECH HI-1612 can be heated up to 250°C. Heating of the parts can be made both in vertical and horizontal position.

Induction heater BALTECH HI-1612 is a structural modification of the heater BALTECH HI-1610 with two cores, allowing at the same time 2 details for heating and to save time on this technological operation when the Assembly of gearboxes, motors, etc. If You do not need to the use of two inductors, you can disable the second core, and to use the induction heater as standard product. Technical features are similar to the BALTECH HI - 1610.