Title: a Tool for mounting bearings BALTECH TOOLS
| Seller: |  Romanov Roman |
| Phones: |  (056) 785-39-60 Show phone |
| Address: | Kyiv, Ukraine |
Wrong installation leads to a 12% early failure of the bearings, and, as a consequence, the entire bearing Assembly. Mounting of bearings, installation of bearings, seals, bushings, guides, rollers and pulleys on the shaft is possible with a special tool for mounting BALTECH TOOLS. It includes impact-resistant polymer rings that help avoid contact metal surfaces and, accordingly, to avoid possible damage the surface of the shaft. Shock bushing, adapted to the hand, as well as special and ergonomic instantaneous hammer. The feature of using the kit BALTECH TOOLS, is that when there is mounting of bearingsand installation of bearings, the ends of the inner and outer rings are in the same plane shock rings evenly transmit the force to the bearing ring, mounted with an interference fit and attached momentum during impact does not pass through rolling elements, and therefore, it is possible to avoid damage to the raceways. That is, in General, the bearing is not damaged during installation and may further properly and safely operated. For convenience, all polymer high-strength rings are marked. The set includes 36 impact of the rings (provide mounting of bearings, bearings mounting over 490 types) instantaneous hammer and 3 sleeve, Packed in a convenient and easy case.
Technical features
Option
Value
The internal diameter of the drum rings
10...50 mm
The outer diameter of the shock rings
26 110 mm...
The number of rings
36 PCs
The number of bushings
3 PCs
Hammer
1 piece
The dimensions of the case
HH
Weight kit
Not more than 3.9 kg
