Stabilizers "Norma 7500 (Capacity of 7.5 kVA) Ljcnfdrf <tcgkfnyfz
| Price: | 3 200 UAH |
| Seller: |  Aleksandr |
| Phones: |  0965323612 Show phone |
| Address: | Kyiv, Ukraine |
VOLTAGE STABILIZERS FOR:
apartments, houses, villas;
shop, office, warehouse;
home appliances, industrial and medical equipment stabilizatory "Norma 7500" (Power 7.5 kW) represent the autotransformer with 8 levels of regulation on the power switches (triacs) with microprocessor control. The greater the level of regulation in the input voltage range 140-180 Volts is 10 Volts, in the range of 180-240 Volts - 20 Volts. The range of input operating voltage is 100-260 Volts. The input voltage range that ensures that the output voltage 220±7% Volt - 138-250 Volts. Performance when changing the input voltage is 20 MS.
Stabilizers are protected against high and low voltage, overheat protection, overload protection and short circuit protection. There is a mode of Transit, allowing the voltage at the input of the regulator to apply directly to the output, the regulator remains off.
Stabilizers provide:
- virtually silent operation (silent voltage regulator);
- automatic disconnection from the network while increasing the input phase voltage exceeding 260 V (300 V for models focused on high - HV voltage)
- undistorted sinusoidal shape of the output voltage;
- work in the whole range of loads from idle to maximum load;
- stabilization of the output phase voltage level 220 ±7% when the input phase voltage from 138 to 250 (175÷298 In models focused on high - HV voltage), frequency 50 Hz;
- the display range of the input voltage;
- indication in case breaker;
- protection against short circuit;
- protection against excess current, with the ability to safely overload for a limited time for starting currents of motors;
- mode "transit";
- consumer protection overvoltage mode "transit" when you increase the input phase voltage of more than 260 C.
- stabilizer off when overheating of the power transformer;
- disabling power switches overheating in the event of an overload;
- protection against incorrect connection of the stabilizer;
The stabilizer has no galvanic isolation between input and output.
Individual orders for possible execution of the stabilizer with any input voltage range.
The stabilizer provides automatic disconnection from the network when the upper limit of the input voltage.
The stabilizer provides protection against short circuit and continuous overload at the output, as well as the mode of transit in an emergency situation.
