The equipment for manufacture of aerated concrete, foam concrete

Concrete installation GBU-1300

Foam concrete installation ITBU-1300

Progressive vibro technology cutting complex. High quality cut. A wide range of received sizes and densities from the D400 to D900. FULL AUTOMATION. Compliance physical and technical parameters of the products obtained GOST 25485-89, GOST 21520. FROM A MANUFACTURER. www.mashbeton.EN

Technical characteristics GBU-1300

• Performance.......... 14 m3 / h

• Weight........................................ 3 400 kg

• Dimensions ...4500*4000*4240

• Power ........................... 36 kW

Trim

• Water treatment module (SRM)

• Dispenser inert

• The mixer (volume l)

• Dispenser-faucet Al (volume 200 l)

• Compressor

• Pump

• Valve with water pneumopathies - 10 PCs

DESCRIPTION:

• Getting aerated concrete (or foam concrete) mixture at a suggested recipe with performance 14 m3/h.

• The density of the resulting concrete (or foam) D400-D800.

• Method of hardening - non-autoclaved.

• Dosing of all components strain dispensers.

• Maintenance required water temperature in the module prepare the water in automatic mode with by using built-in heating elements.

• Blocking operation of the heaters when empty SRM.

• Adding water to SRM full automatic mode.

• Average water temperature in SRM using recirculation automatically.

• The blocking of the pump when empty SRM.

• Blocking automatic mode work with any of the following conditions:

• incomplete SRM

• cold IPOs

• superheated SRM

• insufficient air pressure in the system

• the loss of phase on any of the engines

• Blocking control buttons manual mode when the automatic mode.

• The frequency of the vibrating table using a frequency Converter.

• Regulation of the amplitude and the time of vibration of the mixture in the form.

• Two-mode operation of the mixer.

• The speed control the shaft of the mixer frequency Converter when mixing concrete solution.

• Work in automatic or manual modes.

• In automatic mode, when emergency power off resume with the last produced operations.

• Duplication shutter unloading of the mixer at an emergency power outage.

• Flexible parameterization controller to quickly change the parameters of the technological process.

• The ability to create 99 recipes dispenser and fast viviremos.