Cutting complex CU-12 for cutting foam concrete, aerated concrete
Offer type: salePublished: 28.02.2015
| Price: | 2 080 000 RUR |
| Company: | Proizvodstvennaya kompaniya MashBeton |
| Seller: |  Anisimov Konstantin |
| Phones: |  +7 (4842) 22-48-99 Show phone |
| Address: | Russian Federation |
Designed for cutting concrete array on the building blocks of required sizes. High the quality of the cut. A wide range of derived types. Deviation the geometrical sizes of the products obtained according to GOST 25485-89, GOST 21520. Full automation. FROM THE MANUFACTURER www.mashbeton.EN
Specifications cutting complex CU-12
- Cutting concrete array in the longitudinal and transverse directions simultaneously with speed 224 rpm
- The speed of lowering frame with moving strings
- Speed regulation motion scoring strings
- Speed regulation rotation of the screw removing the rump
- Control the stringing in the process
- Positioning and fixed arrays on duty cutting
- The shift of the composition of pallets arrays under cutting complex and beyond
- Speed regulation mechanical feed pallets with an array of raw
- Change size get blocks
- Possible modes of operation :
- "Manual"
- "Automatic"
"Semiautomatic"
- Locking buttons management Manual mode when the mode "Auto"
- Blocking works mechanical feed if the frame is not in the top position or the tabs tray extended
- In auto mode, when emergency power off start working with the last produced operations
- Lowering frames vertical cuts :
under pressure or
under its own weight frame
