Valve oxygen balloon VK-94-01 (BAMS)

Features:

Brand: BAMS
Weight [kg]: 0,55
Working gas: oxygen
Dimensions, mm: h
Working pressure, cgsm: 200

Valve oxygen balloon VK-94 is designed for installation on steel cylinders for small and medium volume for oxygen on the PP?MA (200 kgf/cm2). The valve is a shut-off device of the cylinders during filling, storage, and withdrawal from them of oxygen.
The valve can be used for compressed air, nitrogen, carbon dioxide and other non-aggressive gases.
The valve has:
certificate of compliance by the Federal Agency for technical regulation and Metrology (Gosstandart of the Russian Federation)- ROSS RU. A,
the permit application at the enterprises and objects controlled by Rostekhnadzor No. RRC 00/21052 of the Federal service for environmental and nuclear supervision.
Valve PCO 36 4573 made by THE 3645-042-05785477-01.
The valve is manufactured types of climatic design UHL or T category 2 according to GOST 15150, but for operation in the temperature range from-50 deg. to +60 deg. C.

VK-94 - oxygen valve used on the cylinders to prevent gas leakage and regulation of oxygen supply. The design of the valve VK-94 prevents depressurization of the container in closed condition. The valve has a tapered thread, which is screwed into the cylinder. The principle of operation of the VK-94-01 simple rotation of the valve there is a gradual increase of the gap through which the gas is fed.

VK-94-01 is designed for steel cylinders are medium in size with a pressure of not more than 20 MPa (which corresponds to 200 kgf/m2) and can also be used for any non-corrosive gases: carbon dioxide, nitrogen, argon or compressed air. Operating temperature valves VK-94 is a wide range from-50C to 60C.

There are other modifications of the product:
for small cylinders suitable VK-94-01 use 7
-balloon ramp VK-94-01 set 03 and use 10
with the bursting of the safety membrane (for increased security) VK-94M-01.

The company BAMS, oxygen valve meets all required standards of quality and safety. Oxygen valve VK-94 will serve you reliably and for a long time. Don't forget to buy the reducer and manometer.

Note for parts for the valve VK-94-01:
-Spindle 379-0014 (VK-94), BAS;
-Valve 379-0200 (VK-94), BAS;
-Nut packing 379-0011 (VK-94), BAS;
-Ring gland 379-0012-01-99 (VK-94), BAS;
-Handwheel 379-0002 (VK-94), BAS;
-Clutch 379-0007 (VK-94), BAMS.

Spare parts (spare parts) for gas welding equipment "BUMS".

Direct delivery of the entire range of products produced by "BAS", , Barnaul, Russia. JSC "Altai plant".

Skype: promsvar

Phone: 7(918)031-49-23 (MTS Russia); 38(050)755-29-10, 38(050)930-25-45 (MTS Ukraine).