Training on vibration, vibration meters, the overall vibration level is "Baltech"

How to avoid emergency situations on the company is not spending huge amounts of money on a powerful system for the diagnosis industrial equipment? Constant monitoring of the "health" of the unit will allow You don't bring the units up to a critical state. The main criteria the state of "health" of the industrial equipment are temperature, the overall level of vibration and the power of the shock (if any) of the rolling elements of the bearings. The overall level of vibration, measured in units of velocity, is gostiruemye parameter required for monitoring the status of the unit. About other methods of diagnostics You can learn by listening for educational training the course is THOR-103 "FUNDAMENTALS of VIBRATION in the Baltech".

Method of vibration on the General level vibration is the most common because of its simplicity and availability, but, unfortunately, it is not very effective for the early detection of faults equipment. Despite this conduct periodic vibration monitoring of machines necessary. The change in the trend of overall vibration level may serve as a signal for serious vibration analysis using modern the signal analyzers such as the BALTECH CSI 2140.

Based on many years of technical experience specialists of Baltech", identified the major sources of increased vibration units, namely the imbalance and misalignment. Only 10% percent all cases all cases increased the vibration was caused by any defect. Using vibrometers BALTECH VP can be easily put a "diagnosis" our unit. To do this, the specialist should measure the overall level of vibration on the unit in three directions: axial, horizontal and vertical. To decrypt the received data is very simple: a higher level of vibration in axial direction occurs when the misalignment in the horizontal when the imbalance, and in the vertical with the weakening of the Foundation or supports. To resolve imbalance or misalignment, it is recommended to use a modern tool such as: "QUANTUM-LM" system laser alignment of shafts and shafting, vibration analyzer-balancer BALTECH VP-3470 and "PROTON-Balance-II - vibration meter-tachometer-balancer-thermometer.

Vibrometers of Baltech" series BALTECHVP (VibroPoint) are precise, effective and convenient tools for periodic monitoring and initial diagnostics of industrial equipment, as evidenced by the certificate of type approval of measuring instruments. Training on vibration in our the company made monthly (see schedule on our sites).