Installing bearings, mounting of bearings, maintenance and training

To extend the service life of bearing assemblies, installation of bearings should be compliance with manufacturers ' recommendations and with the requirements of applicable regulatory documents. There are several installation methods bearings - mechanical, hydraulic or heat. The way to install the bearings in the first place depends on their type and size. However, in all cases should not be allowed to rings, separators or the rolling body were under attack, as this will definitely cause damage to the bearing. The load shall be applied only to the ring, which must be installed on the seat! Therefore, special attention should be given to the tool to install bearings excluded the possibility of damage to the bearings.

When heat the method of bearing the most convenient to use the technology induction heating parts. Unlike maslanyj baths, induction heating parts during installation saves time (the heating process takes place in several times faster), energy (all energy is expended on heating directly bearing or part), as well as the induction heating is an environmentally friendly process (no smells, the smoke and the need for disposal of waste oil). The Baltech, St. Petersburg in real the moment offers a complete line of induction heaters. Compact, with electronically controlled, highly efficient and economical induction heaters BALTECH HI-1633 equipped device demagnetization of parts and allow the specialists services heat bearings and parts by weight of a few tens of grams to hundreds of kg. For Assembly lines in the range there are models with temperatures several bearings.

Mechanical the method also requires installation of bearings the use of a special tool. The Baltech developed set BALTECH TOOLS for quick and correct installation of the bearings. Choosing the right combination of sleeve and shock ring provides an efficient transfer of force to the bearing ring installed with an interference fit without damage to the tracks or rolling elements of the bearing. Use kit Assembly tools BALTECH TOOLS when mounting bearings allows to increase the reliability and durability of the bearing unit. Set BALTECH TOOLS provides installation and installation of more than 450 types of domestic and imported bearings. Thirty-three high-impact polymer rings that included in this kit provide correct transmission of force when installing bearings (when the shock ring evenly transmits the force to the bearing ring, which is mounted with preload). It also includes three shock bushings and special instantaneous the hammer. For convenience, all high-strength polymer rings marked under different sizes of bearings. Shock ring can be used when mounting bearings with a press.

For large bearings turned out to be very useful developed a number of firms hydraulic nuts and devices for oil-pressing landings. Installation bearings on tapered fit is a challenge. Using hydraulic nuts related problems are minimized. Oil is supplied to in the annular cavity of the hydraulic nut and presses the piston, which passes efforts on the fastening part is easy, simple and safe. Nuts series are supplied with quick release fittings for connection to the hydraulic pumps.

Details with all the subtleties of the bearing You can Training center "Baltech". The course "Reliability of bearing node (CP-201) contains the following topics: Classification of rolling bearings, Interchangeability and features of bearings, Requirements transportation and warehousing, quality control, Rules installation/dismantling, examination of the causes of failures, Tool maintenance bearing assemblies.

Get practical skills of using different tools for installation bearings, to work out all the possible ways install bearings if you use the school stands for rolling bearings BALTECH Bearing with the possibility play up to 10 different options for mounting the bearings.

The Baltech performs field service and training for installation of bearings and installation the bearings.