Panels shcho-70

Panels SHCHO-70 is designed for picking switchgear (LVSG) three-phase alternating current with frequency 50 Hz in networks with earthed neutral voltage of 0.4 kV, serve to receive and power distribution, protection from overloads and short circuit currents, and are used for installation in distribution networks as in four-wire, and five wired versions with zero work and protective earthing the conductors.

Device products

The frame panels are made of galvanized steel with technology riveted connections, which greatly increases the hull strength, improves the appearance and corrosion-resistant properties of the product. The door locks, made of black steel with subsequent coating (powder or paint).

Inside the frame on the bracket frame is located installed equipment which is devices that are installed on the front frame members (management circuit breakers linear panels through Windows in doors).

For mounting the busbar at the top of the panel install the bracket with the insulators. With frontage on the top ledge panel install the instrument panel, which also serves as the fence busbars.

For attachment of suitable cables and wires provided the perforated area, welded to the lower zone of the frame.

The Assembly of panels in the shield is bolted connections through the holes in the rack panels.

Panel S-70 are available in four constructive modifications: width of the facade 400,600,800,1000 mm.

Their purpose panel S-70 are divided into:

- introductory panel;

panel line;

panel sectional;

panel input line;

panel introduction-section;

- panel with equipment ABP;

panel Supervisory control street the lighting.

T./F. 4922-305368 ;8-903-6471471