Solid fuel boilers CT-2E
| Company: | TD Favorit |
| Seller: |  menedzher menedzher |
| Phones: |  0505020019 Show phone |
| Address: | Ukraine, Donets'ka Oblast', Donetsk |
Range boilers CT-2E is a solid-fuel boilers of new generation. Efficiency in the operation of these boilers can achieve due to the high efficiency up to 86%.
But the main characteristic difference of this line of heating boilers became complete safety for the environment.
Use in the boiler system fan controller along with the top method of combustion and distribution of the jet air nozzles approximates the combustion process to the generating system with a single mandatory combustion of produced gas.
It is worth noting that the solid fuel boiler of CT-2E you can download once in 12-48 hours, since this term is necessary for complete combustion of one dose of fuel. However, even this period can be extended depending on the insulation of the building and the outside air temperature. Important role in consumption also plays the type of fuel used. Solid fuel boiler heating from Ukrainian producer "Alta Center has a certificate evidencing multiple trials, as well as environmental certificate.
The solid fuel boiler of CT-2E is especially often used in homes, commercial buildings and workshops, however, among the wide variety of this line of boilers can easily find a suitable boiler for schools, hospitals and shops. Power boilers of this type varies from 17 to 120 kW.
Technical features of boilers CT-2E
Body solid-fuel boilers of this series has a combustion chamber and heat exchanger, which is made of steel of high quality. The furnace is designed in the shape of a tetrahedron, which also has an aeration nozzles, and the bottom has a water grate is made of thick-walled pipes. Convection channels in CT-2E, as in all products Alta Center" is located in the upper part and have the form of a number of "shelves". This design allowed us to increase the efficiency of boilers due to the fact that the convection part does not accumulate condensation.
The front part of the boiler incorporates access panels for cleaning ash, they, by the way, and easier access to the convection channels. There was also a furnace and a loading door that is finished in a special heat seals on the ground. Actually, I should say that the solid fuel boiler of CT-2E all equipped with quality insulation, which protects the metal casing.
Installation of solid-fuel boilers CT-2E must be performed according to the SNIP. Its work is carried out cyclically, once is enough to load the fuel to ignite the boiler by means of paper and run the automation. As soon as the preset temperature is reached, the fan will turn off, and the controller supports it. The next time the fan will turn on only after the temperature drops below a preset level. If the furnace runs out of fuel, the controller automatically turns off. Then to run the boiler can be after you clear the ash and combustion chamber.
Features boilers CT-2E, which made them popular:
- The presence of the microprocessor and fan, which can control the operation of the boiler;
- Cyclic functioning of the boiler;
- Easy access to convection channels;
- The ability to automatically maintain the desired temperature;
- The ability to increase the combustion chamber, if necessary;
- The equipment hatch for cleaning boiler ash in front of the boiler.
