Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  wood-working machines

The crosslinking of baguette ▸ Pilm Join

Offer type: salePublished: 27.02.2015
Company:Alfamacchine Ukraine
Seller:Tislyuk Andrij
Phones:
Show phone
Write a message
Address:Ukraine

Machine for fastening the frame corners are equipped with logical pneumatic actuator. Controlled by an on / off pedal: initial pressure on the pedal presses the frame (work front horizontal and vertical clamps, and a further push the pedal initiates the insertion of staples in the current position. You need a compressor with a working pressure of 8 ATM. For apply bracket height 4-7-10-12-15. The connection angles of 90°, 120° (hexagonal) and 135° (octagonal), with minimum cross-section of 5x5 and maximum 100 × 80. JOINT 5×5 SUPER equipped with adjustable pressing force and speed of the clip. Perhaps the choice of manual or automatic operation cycle to check the angle before installing the brackets. For more has a device for testing normal and overlapping brackets.

• Capacity for brackets : 250

• Dimensions clips 4-7-10-12-15 mm

• Dimensions : cm 35x45x32

• Weight : 31 Kg

• The size of the baguette : min 5×5 mm; max 100×70 mm

• Pneumatic power supply : 8 bar

• Air consumption per cycle: 1.60 nl a 7 bar

• Functioning : manual and automatic

• Working cycle : 50 min