level switch membrane-type sum-1

The level sensor SUM-1 as the correct name - detector the level of grain SUM-1 is the sensor level which is widely used to control the level bulk materials in silos (hopper level sensor) tanks, grain elevators, tankers etc

This type sensors, alarms, because of the simplicity and reliability of its design very widely used in various industries such as:

agriculture - granaries, elevators, bins;

processing, mining and the food industry (bakery, mill, grain-enterprise, sawmills, quarries, etc.

transport - cars, tankers, containers, sea and river ports, a loading station and .t.d

SUM-1 U2 - membrane sensor SUM-1 - level switch MSL-1 U2 principle based on the actuation of the microswitch under the influence of its follower of the membrane which, in its turn, affects the product, the level of which is controlled.

Basically the sensor mounted on the vertical wall of the Elevator, silo, hopper, when pour into the hopper of the product reaches the level at which you set the alarm SUM-1, it presses on the membrane, and this causes a circuit or the break contacts of the microswitch sensor SUMO in the circuit process control or alarm circuit or the automation.

The detector SUM - sensor membrane SUM-1 U2 has prevlocation performance degree IP 54 what you can use them in dusty premises and rooms with aggressive the operating conditions.

Breaking capacity at the contacts 2A at rated voltage 220V

The sensors are SUM-1 U2 also prescribed to thermoproof and conveying mechanisms, they equipped with a membrane with high wear resistance.

LLC "UKRAGRO", Kharkov

+38 (066) 702-02-06

+38 (057) 780-96-49

roma@ukrtehgroup.com

http://ukrtehgroup.com/tag/datchik-sum1

http://ukrtehgroup.com/signalizator-urovnya-membrannyj-tipa-sum-1

http://ukrtehgroup.com/category/kip/page/3

www.ukrtehgroup.com