Disaprovingly machine "Sirius universal".
Offer type: salePublished: 05.11.2013
| Seller: |  Vasilij |
| Phones: |  050 3805554 Show phone |
Disaprovingly machine "Sirius universal" is designed for the straightening iron and alloy wheels automotive wheel sizes:
- diameter of from 12 to 20 inches (305-457 mm);
- width from 4.0 to 8.0 inches (100-203,2 mm).
The machine allows you to restore the profile seats for the installation of tires, to fix Slipknot, radial and axial runout car wheels without much physical effort.
That is why this machine is 2 methods:
1. By simultaneous or sequential bilateral rolling of the inner and outer parts of the disk stationary and swivel casters.
2. With the help of a hydraulic cylinder, which is installed in one of the stops provided on the machine and driven by the handle of the valve. Place the straightening of the disk is pre-heated by the burner (with the machine not included).
On disapprovingly the machine is equipped with a cutter, which allows you to handle the drive after welding and straightening, as well as to trim the outer edge of the disk.
Install the disc onto the spindle disaproving machine is on hole mount, which allows adjustment according to the scheme of fixing the wheel to the hub of the car.
- diameter of from 12 to 20 inches (305-457 mm);
- width from 4.0 to 8.0 inches (100-203,2 mm).
The machine allows you to restore the profile seats for the installation of tires, to fix Slipknot, radial and axial runout car wheels without much physical effort.
That is why this machine is 2 methods:
1. By simultaneous or sequential bilateral rolling of the inner and outer parts of the disk stationary and swivel casters.
2. With the help of a hydraulic cylinder, which is installed in one of the stops provided on the machine and driven by the handle of the valve. Place the straightening of the disk is pre-heated by the burner (with the machine not included).
On disapprovingly the machine is equipped with a cutter, which allows you to handle the drive after welding and straightening, as well as to trim the outer edge of the disk.
Install the disc onto the spindle disaproving machine is on hole mount, which allows adjustment according to the scheme of fixing the wheel to the hub of the car.
