Hatches invisible under the tile and mosaics
Offer type: salePublished: 11.11.2013
| Seller: |  Vojtenko Tat'yana |
| Phones: |  0504210531` Show phone |
| Address: | Ukraine, Autonomous Republic of Crimea, Pereval'ne |
One of the most popular places to hide revision - this bathroom is decorated with tiles. This Dutch company sichTBar developed a design for the audit of the hatch, which is glued tile, tile, marble or any other cladding material. Luke is a strong enough and will handle quite a lot of weight cladding, hiding quietly communication.
The range includes four types of sanitary manholes:
1.Swing click hatches under the tile
2.Swing on the suction hatches under the tile
3.The sliding suction Cup mount hatches under the tile
4.Sliding PTC hatches under the tile
The hatch design is quite simple and consists of two main parts. The basis for the mounting and installation of the revision of the hatch is a steel frame, its depth is 50 mm To it using Odnokolenko, multi-loop secures the movable sash. On the basis of the installed moisture gipsovolokno, on which is pasted a facing material. Working shutter protrudes outside of the stationary frame 15 mm and is set in the level with the wall. The total depth of construction 65 mm, These parameters must be taken into account in the preparation of niches to install the audit of the hatch. To the inner frame mounted locks, PTC or roller, depending on the type of opening.
The tabs of the tiles outside the operating sash horizontally permitted to 45 cm around the loop and up to 75 mm in the opposite side. Vertically on both sides up to 75 mm
Our company can produce any size to order. The specialists of our company can make an individual drawings and to solve any problem invisible hide revision. Address: p. saddle, Suburban street 49
The range includes four types of sanitary manholes:
1.Swing click hatches under the tile
2.Swing on the suction hatches under the tile
3.The sliding suction Cup mount hatches under the tile
4.Sliding PTC hatches under the tile
The hatch design is quite simple and consists of two main parts. The basis for the mounting and installation of the revision of the hatch is a steel frame, its depth is 50 mm To it using Odnokolenko, multi-loop secures the movable sash. On the basis of the installed moisture gipsovolokno, on which is pasted a facing material. Working shutter protrudes outside of the stationary frame 15 mm and is set in the level with the wall. The total depth of construction 65 mm, These parameters must be taken into account in the preparation of niches to install the audit of the hatch. To the inner frame mounted locks, PTC or roller, depending on the type of opening.
The tabs of the tiles outside the operating sash horizontally permitted to 45 cm around the loop and up to 75 mm in the opposite side. Vertically on both sides up to 75 mm
Our company can produce any size to order. The specialists of our company can make an individual drawings and to solve any problem invisible hide revision. Address: p. saddle, Suburban street 49
