Pectrometry equipment
Offer type: salePublished: 26.11.2013
| Seller: |  Varvarkin Igor' |
| Phones: |  8920-126-50-71 Show phone |
| Address: | Russian Federation, Yaroslavskaya Oblast', Yaroslavl |
ABRASIVE BLAST EQUIPMENT CONTRACOR
THE SANDBLASTING APPARATUS DBS
Designed to work with any dry abrasive fraction to 3.5 mm Sandblasting of metal structures, concrete surfaces. The degree of purification to SA to 3.0. Performance up to 37 m2/h
ПАРАМЕРЫDBS-100DBS-200
Max. working pressure bar 12 12
The tank capacity, litres 100 200
Operating temperature, °C -10 / 50 -10 / 50
The tank diameter, mm 508 609
The height of the tank, 1226 mm 1480
Weight kg 105 135
SANDBLASTING NOZZLE VENTURI CONTRACOR
Sandblasting nozzle with a Venturi channel provide a wide contact patch with the abrasive surface and allow for 100% save kinetic energy (speed) of the abrasive to the nozzle exit. The Venturi nozzle is the best choice for high performance when processing large surfaces. The performance of the nozzle channel Venuti 40% higher than that of similar nozzles direct channel. In addition, the abrasive flow rate is reduced to 40%.
THE NHP APODERADO
Intended for mounting on sandblasting hose with an internal diameter of 25 mm or 32 mm Supplied with rubber gasket and screws
Thread: 50 mm - corresponds to the threaded nozzle Contracor material: nylon
BLASTING HOSE EXTRA BLAST
Wear-resistant, static-neutral blasting hose. Designed for any kind of abrasive blasting operations. The inner sleeve is made of natural rubber with high resistance to abrasive wear.
Working pressure: 12 bar
Burst pressure: 36 bar
CRAB CLUTCH CQP, CQT
For mounting on the sand-blast hose with an internal diameter of 25 mm or 32 mm Compatible with crab clutches CFT on sandblasting apparatus Contracor
Clutch crab CQP made of nylon, the material of the bonding metal.
THE SANDBLASTING APPARATUS DBS
Designed to work with any dry abrasive fraction to 3.5 mm Sandblasting of metal structures, concrete surfaces. The degree of purification to SA to 3.0. Performance up to 37 m2/h
ПАРАМЕРЫDBS-100DBS-200
Max. working pressure bar 12 12
The tank capacity, litres 100 200
Operating temperature, °C -10 / 50 -10 / 50
The tank diameter, mm 508 609
The height of the tank, 1226 mm 1480
Weight kg 105 135
SANDBLASTING NOZZLE VENTURI CONTRACOR
Sandblasting nozzle with a Venturi channel provide a wide contact patch with the abrasive surface and allow for 100% save kinetic energy (speed) of the abrasive to the nozzle exit. The Venturi nozzle is the best choice for high performance when processing large surfaces. The performance of the nozzle channel Venuti 40% higher than that of similar nozzles direct channel. In addition, the abrasive flow rate is reduced to 40%.
THE NHP APODERADO
Intended for mounting on sandblasting hose with an internal diameter of 25 mm or 32 mm Supplied with rubber gasket and screws
Thread: 50 mm - corresponds to the threaded nozzle Contracor material: nylon
BLASTING HOSE EXTRA BLAST
Wear-resistant, static-neutral blasting hose. Designed for any kind of abrasive blasting operations. The inner sleeve is made of natural rubber with high resistance to abrasive wear.
Working pressure: 12 bar
Burst pressure: 36 bar
CRAB CLUTCH CQP, CQT
For mounting on the sand-blast hose with an internal diameter of 25 mm or 32 mm Compatible with crab clutches CFT on sandblasting apparatus Contracor
Clutch crab CQP made of nylon, the material of the bonding metal.
