Impregnat Dry - protection (hydrophobization) surface

Impregnat Dry - special tool for impregnation, which is intended for waterproofing and protection of stone, concrete elements, vibration-molded pavers, FEM (figure paving elements), etc., from the adverse effects of the external environment.

Impregnat Dry - special impregnating agent, which is applied to the surface for the purpose of providing water repellency
(hydrophobicity).

Means for impregnating Impregnat Dry:
- improves the surface quality and the intensity of the colors of concrete, prevents the formation of efflorescence on concrete products;
- improves water resistance and resistance to atmospheric and chemical influences;
- increases frost resistance and resistance against impact-icing chemicals;
- penetrates deeply into the structure of the base (5 mm);
- gives the surface hydrophobic properties;
- prevents efflorescence (white salt stains) and liquidow;
- prevents the formation of moss;
- enhances the color of the ground;
- facilitates the removal of stains from oil and other contaminants;
- increases the resistance base, resistant to UV radiation;
- anti-slip does not change the parameters of the framework.

Features and applications:
Impregnat Dry - ready to use concentration, which makes it very easy to use.

Product for professional use.

Specifications:

Consistency: liquid
Color: colorless
Odour: characteristic
Density: 0,98 g/cm3
Consumption: 0,15 - 0,5 l/MSA 1 application
Shelf life: 12 months in original sealed containers above 5°C.
Packing:
Canister: 5 l, 10 l, 20 l

The Use Impregnat Dry:
- protects the surface of concrete products from exposure nattoptorry substances at gas stations;
- protection and exposure color pavers for the purpose of giving it an attractive appearance, alleys, private courtyard, square, etc.;
- protection of concrete surfaces lined with pavers that are exposed to the anti-slip agents, driveway, sidewalks, etc.;
- reduces the abrasion index and increases the strength of the products;
- reduces water absorption and increases the rate of frost resistance;
- protects surfaces from getting wet, damage from freezing and cracking;
- reduces the absorption of dust and dirt;
- prevents mildew and liquidow;
- enhances the color of products from concrete, pavers, etc., giving it an attractive appearance: alleys, sidewalks, private courtyard, gas station, square, etc..

Preparation of the base:
The surface of the pavement prior to application of the impregnating means Impregnat Dry should be cleaned with water - better under pressure (Karcher), and in heavily polluted areas solely by mechanical means with a brush. If the surfaces are covered with white salt stains - salt, mushrooms, moss-grown, and heavily soiled, after the removal of dirt and full
the surface is dry, it is necessary to conduct sanitization framework antifungal agent and a drug for treatment of efflorescence (white spots) and update surfaces Putz-EC.

After drying, if necessary, to fill in the cracks between the paving stones of fine, dry sand. The excess sand is necessary to wipe off the prepared surface.

Impregnation basics
Impregnating means Impregnat Dry should be applied after drying of the prepared surface. It is recommended to apply 1-2 coats.

The second layer is applied after drying of the first layer. Impregnat Dry is applied with a brush, roller or by spraying (low pressure).

When lining the impregnating means, the temperature of the substrate have at least 3 ° C higher than the dew point temperature. The surface of which is impregnated by means Impregnat Dry dries in 1-2 hours at 20ºC.

Full performance properties for pedestrian traffic reaches 12 hours, for traffic after 24 hours.