N vertical drilling 35 mm b/1976
| Price: | 16 000 UAH |
| Company: | OOO NPF 'Marsh' |
| Seller: |  Leman Andrej Borisovich |
| Phones: |  (066)6292942 Show phone (093)0332720 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Used machine, 1976 in Odessa, is connected, you can check, in excellent condition
Specifications:
Machines model n designed for drilling, boring,
tankowanie, reaming, thread cutting; it is used in conditions
single and serial production
Accuracy class N
Drilling capacity in steel 45 GOST 1050-74, 35 mm
The size of the cone of the spindle according to GOST 25557-82 Morse 4
Distance from spindle axis to the guide columns, 300 mm
Maximum travel of spindle, mm 250
Distance from spindle nose, mm:
- up table II-750 mm
to plate 700mm-1120mm
Most (installation) moving the drill head, 170 mm
The movement of the spindle per one rotation of the wheel, mm 122.46
Working surface of table, 450x500 mm
Maximum travel of table, mm 300
The installation size of the T-slots in the table according to GOST 1574-75:
Central 18H9
- extreme 18H11
The distance between two T-slots according to GOST 6569-75, 100 mm
Number of speeds 12
The limits of the rotation speed of the spindle, 1/min 31,5-1400
The number of submissions 9
The limits of feed, mm/Rev 0.1-1.6
The largest number of cut hole h 55
Management cycles Manual
Type of current supply mains three-Phase
The supply voltage, 380/220
Overall dimensions, mm:
- height 2535
- width 825
- length 1030
Machine weight, kg 1200
