Bucket Elevator

Model:GX150-GX600; LS100-LS1250

Diameter of screw(mm):100-1250(LS)

The course screw(mm):100-630(LS)

Port delivery:Qingdao, Shanghai

Screw conveyor consists of a drive gear and motor), torque screw (the working body of the machine), the drive shaft with a fortified it turns transporting screw chute with a semi-cylindrical bottom, boot and the discharge device. Through the holes in the top of the gutter is fed bulk cargo and slides along the trough when the rotation of the screw. Joint rotation of the load screw prevents gravity cargo and rubbing it on the chute. Through the holes in the bottom, and is equipped with gates is & other fix spot labelingCAD the gutter. The screw auger perform one, two or transformam on the right or left the direction of the spiral. The surface of the screw auger is bladed, shaped, tape, clear (used when moving powder bulk, dry fine goods, ne prone to caking). When moving caking of goods used screws screw blade, shaped, belt surface.

Shaft screw auger consists of separate sections and can be tubular (attested between the plug on the ends of short connecting rollers, have less weight) or solid. Screw shaft of the screw lies in end (strengthen in the end the walls Weloba) and intermediate (suspended on top mounted on a transverse groove bars) bearings. One of the end bearing resistant and do establish from the beginning of the movement of cargo. Intermediate bearings are small diameter and length, as wellas reliable sealing in order to avoid particle contamination of the cargo.

Read more:

http://www.inczk.ru/conveyor/60.html

http://www.inczk.ru/index.html

E-mail:ec12@zkcorp.com