Wood lathe machine Master Practitioner 2500 B/Y (b.W.)

Will sell the machine is a Master Practitioner 2500 B/Y (b.W.) Was purchased 10.06.2014 year, still under warranty, used little, in complete set + homemade frame legs for installation on the floor.
Woodworking machine Master Practitioner 2500 is a versatile woodworking machine which is suitable for the use of his household, as well as for small industries. Whether you are a professional or first became interested in the manufacture of wood products, this machine wood without doubt will not cause you problems with the operation.Master Practitioner characterized by its simplicity and intuitive adjustment and running.High safety class.A large number of functions combined in one machine.The European quality of housing of the machine and his snap.Affordable cost.Modern appearance.

The main functions of model Master practitioner 2500:
-planing on the plane and at an angle (ribs),
-longitudinal cut along the edge and at an angle,
-longitudinal cutting plane ,
-filter the quarter
-wood cutting transversely and at an angle
-drilling
-milling disk and end mills

Specifications:

Engine power: 2500 W

Rated voltage: 220 C.

Current frequency: 50 Hz.

The number of revolutions during cutting : 2850 rpm

The number of revolutions at planing and milling: 7700 rpm

The maximum diameter of saw blade: 315 mm

Maximum cutting depth: 117 mm

Maximum planing width:270 mm

Maximum planing depth: 0-3 mm.

The maximum amount of disk cutters: 125 mm

Sirina milling disk: 10 mm

Drill diameter max: 12 mm

The range of angles of cutting along the grain and planing using range: 0-45 degrees

The range of angles of cutting across the grain and planing using range: -45 to +45 degrees

The size of the saw table: h mm.

The size of the table when planing: h mm.

The size of the table for milling: h mm.

Dimensions: HH mm.

Machine weight: 57 kg
Made in the Republic of Belarus.
Equipment stanaka wood Master practitioner 2500:
-fence for the saw blade,
-an enclosure for the disk cutter (included with riving knife),
-line guide,
-handles-screw clamps,
angular range of cross-cutting,
-holder position,
-fence for cutter drum,
-modular rotary bracket,
-shelf for milling,
-fencing for end mills,
-snap,
products for fastening
instructions use woodworking machine Master Practitioner 2500.