N drilling machine used

Used machine 1971 in Odessa.

Vertical drilling machine N used in enterprises with individual and small-scale production and is designed for drilling, boring, tankowanie, reaming, reaming and cutting of the ends of the knives. The presence of the machine mechanical feed spindle for manual operation cycles of operation, allows the machining of parts in a wide range of sizes from a variety of materials using tools made of high-carbon and high-speed steels and hard alloys. Installed on the machine electrical device reversing of the engine main motion allows tapping machine taps with manual feed of the spindle.

Specifications vertical drill N.

Name parameter Units.MEAs. Value
Drilling capacity in steel 45 GOST 1050-74 25 mm
The size of the cone of the spindle according to GOST 25557-82 Morse 3
Distance from spindle axis to the guide columns 250 mm
Most spindle stroke 200 mm
Distance from spindle nose to table mm 60-700
Distance from spindle nose to plate mm 690-1080
Most (installation) moving the drill head 170 mm
The movement of the spindle per one rotation of the wheel 122 mm, 46
Working table surface mm h
Maximum travel of table 270 mm
The installation size of the Central T-shaped groove in the table according to GOST 1574-75 mm 14H9
Installation size at T-slots in the table according to GOST 1574-75 mm 14H11
The distance between two T-slots according to GOST 6569-75 180 mm
Number of spindle speeds 12
Range of number of revolutions of the spindle rpm 45-2000
The number of submissions 9
The limits of feed mm/Rev 0,1-1,6
The largest number of cut holes in the 60 hours
Management cycles manual
Type of current supply mains three-phase
The supply voltage In 380/220
Engine type main motion 4АM90L4
The engine main motion 2,2 kW
The pump type cooling x14-22M
The engine of the motor cooling kW 0,12
The performance of the electric pump cooling l/min 22
Machine height 2350 mm
Width of machine mm 785
Machine length mm 915
Machine weight kg 880