Mobile handling system with pre-treatment unit

Mobile handling system with pre-treatment unit grain HIMEL consist of the conveyor auger funnel Assembly pre-treatment grain V 25 and the cyclone separator. Thus when using this unit, it is possible to simultaneously unloading and cleaning the grain.
Working principle: the Grain or other granular material is fed into the receiving hopper of the screw. Grain, moving along the axis of the screw auger enters the pre-treatment unit, where the cleaned grain from lung Sora. The pre-treatment unit V 25 is an air separator, which cleans on the basis of different aerodynamic properties of grain and impurities. Air separator is equipped with a centrifugal fan, created the air flow highlights of the grain mass of organic litter (pieces of straw, chaff, chaff, dust, husk).
- Power up to 25T/h (on request up to 60 t/h)
Powerful drive with low power consumption at high power
- Reinforced chassis, stable mounting of the cleaning mechanism and the cyclone separator
- The system is fully assembled, with integrated machine motor with plug / socket connector.
Basic configuration
- Screw conveyor complete with a powerful pre-treatment unit grain capacity up to 25 t/h
- Power drive 1500 rpm, 400V, with V-belt transmission
- Low power consumption at high power
- Galvanized transport pipe with an intermediate bearing for smooth running of the machine, the discharge hole diameter of 150 mm
- Reinforced chassis, stable mounting of the cleaning mechanism, V 25, cyclone separator
- Turbocharger (unit pre-treatment) with electric motor 3,0 kW, 3000 rpm, 400V
The power regulation on the blow nozzle with a diameter of 150 mm
With tubular parts, adapters and swivel clamps for grain gun
- Integrated machine motor with plug / socket connector
- Fully assembled
Without the cyclone separator (additional charge)