Digital multimeter DT9205A

Value Value Accuracy
DC voltage DC
from 200 MB to 200 In
1000
± 0.5%
± 0.8%
AC voltage AC
from 200 mV to 200 V
750 In
± 0.8%
± 1.2%
DC DC
20 mA
200 mA
20 And
± 1.2%
± 2.0%
± 3.0%
Alternating current AC
from 2 mA to 200 mA
20 And
± 1.2%
± 2.0%
Resistance Ω
from 200 Ohms to 2000 ohms
20 MW
2000 MOhm
± 0.8%
± 1.0%
± 5.0%
Capacity C
from 2 nF to 20 UF
200 µf
± 2.5%
± 5.0%

Test transistors: +;
Audible continuity test of electrical circuits: +;
Added test: +;
Power supply: 9V battery type Krona;
The indications hold (HOLD);
Size of the multimeter: him;
Swivel digital display;
Weight with battery: g;
Package contents multimeter:
Device;
Probes;
9V battery type Krona (can be set);
Instruction manual;
Warranty card;
The original cardboard packaging.
Digital multimeter DT9205A ― functionality above pictures
DT9205A is a multifunctional digital measuring device. It can measure not only the standard for many of these systems readings (AC and DC voltage, current and resistance) and capacitance.
Digital multimeter DT9205A profitable to buy at great value "price" is "functionality". In the segment of cheap multimeters it is one of the few models that has stood the test of time. DT9205A is one of the most popular models for beginners and experienced Amateurs.
Let us consider the features of this measuring device. The device is quite wide measuring ranges: DC voltage up to 1000 V AC to 750 V.
Pay attention to such important key differences:
measurement of DC and AC. Not often you see the device that measures AC current. DT9205A deal with it;
the limit measure current with multimeter (DC and AC) up to 20 Amps! In most cases, for solutions to Your problems more than enough, because often many professional multimeters to measure amperage up to a maximum of 10A;
the measurement limit of resistance is expanded to 200 MW. In such a wide range is practces the entire standard range of resistors;
many devices from other manufacturers, for testing transistors requires special functional adapter. Multimeter DT9205A such an adapter is not needed, as it already has the required connectors to work with the transistors on the body.
Useful and rare design features multimeter DT9205A
One of the main distinguishing features of this device is the rotary screen. It has 4 positions and can be installed almost at right angles. Also the screen itself is quite large and has high contrast and clarity.
The device has a special protective casing made of soft polymer material that protects the multimeter from knocks. The cover absorbs the force of impact, which prevents damage, as the enclosure and its filling.
The device has double insulation and protected by fuses, which not only guarantees the security of the device, but also your protection.
The rotary switch has a secure fit that eliminates the chance of accidentally switching the device to another measurement mode.
The back of the body there is a great folding stand, allowing convenient to place the meter at an angle.

If measuring in addition to these options, You are faced with the task of temperature measurement (up to 1000 ° C) and frequency (up to 20kHz), our recommendation is to order DT9208A. It is almost completely identical to the model, but equipped with a thermocouple. However, the limit of measurement of the capacitors is reduced to 20 UF. Another function DT9208a, characteristic for expensive professional multimeters ― test of logic circuits and microcontrollers.