Pickling paste TS-K 2000
| Price: | 600 UAH |
| Seller: |  Elena Ivanovna |
| Phones: |  0661219929 Show phone |
| Address: | Ukraine, Odessa oblast', Odesa |
Pickling Paste TS-K 2000 Pelox
Pickling paste TS-K 2000 processing area of the weld and removal of local corrosion
Volume: 2 kg.
Pickling paste removes scale, dirt and corrosion at the welding seam and in the zone of influence of the temperature
Transparent gel-like paste on the basis of hydrofluoric (hydrofluoric) acid and nitric acid.
Is used to eliminate the harmful effects of high impacts after welding or machining (discolouration, scale) and restore the passive layer on stainless and acid resistant steels in the areas of thermal influence, and also to remove impurities that can adversely affect corrosion barrier.
Ensures the cleanliness and beautiful appearance of weld. Does not contain hydrochloric acid and chlorides. Thanks to gel-like consistency can be applied on vertical surfaces.
Method of application:
Before using the paste TS-K 2000 dirty or painted over the seam must be free from oil, paint or other contaminants... Paste to apply on the treated suture with a brush evenly. One should not bring pasta to the open fire, leave the paste under the action of direct sunlight.
After etching remaining paste TS-K 2000 is recommended to wash off with running water, which after processing it is desirable to add neutralizer HD (or treated with 20% aqueous solution of lime).
Duration:
-Approx. 10 min. at 25-30 With
Consumption: 150-250 linear. m /kg
At the end of the etching process rinse with water
-Composition: Acid fluorescent < 7% nitric Acid < 20%
Storage temperature:0... 35 C
Consumption: 150-250 linear. m /kg
