Transformer-TVK-75
| Price: | 17 000 UAH |
| Company: | TOV 'Tehno-L' |
| Seller: |  Anton |
| Phones: |  (044)2094699 Show phone |
| Address: | Ukraine, Kyiv |
Transformer TCE-75
The transformer TCE-75– single phase welding transformer TCE-75.
It the main purpose – power multipoint and single-point resistance welding machines of various type - MTM, MT, RTMS, of which where, MTR and others.
Transformer welding TCE-75 made in climatic design -NF4 (04). Nominal values of climatic factors correspond to GOST 15150-69 and GOST 15543-70, except the temperature of the cooling water, the upper and lower value, respectively, is set equal to + 25°C and 1°C. For transformers TCE-75-04 the exception is the upper value of ambient air, which is set equal to + 40 °C. environment explosive, not containing dust concentrations, reducing the parameters of transformers in an invalid limits.
Transformers series TCE-75 are designed for
work indoors at
the following conditions:
-Altitude above sea level up to 1000 m;
-Ambient temperature from -1 to +40 0°C;
- Relative humidity of ambient air 65% at 20 °C;
-Temperature
cooling water is not higher than +25 °C
Main technical characteristics of transformers TCE-75
Technical parameters
The value
Nominal primary voltage,
365
Nominal welding current, kA
25
Lasting secondary current, And
9000
The no-load current in % of long the primary current
6
The water pressure in the cooling system, kgf/cm2
From 1.5 to 3.0
The water flow rate not less than, l/min
3,5
No load losses, watts
160
Losses, short circuit protection, W
3950
The maximum conventional power at 50% duty cycle, kVA
75
Weight, kg
107
