VG lathe
Offer type: salePublished: 26.11.2015
| Price: | negotiated |
| Company: | ChP Litvin |
| Seller: |  Roman |
| Phones: |  0632843425 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
The maximum diameter of the processed billet, mm:
over bed: 445
over carriage: 220
above the recess in the frame: 620
Maximum length of workpiece, mm:
over cross slide: 1000
above the recess of the bed: 290
above the recess of the frame when mounted on the faceplate: 240
Maximum turning length, mm: 900
The spindle end flange GOST 12593-72: 6K
The centre according to GOST 13214-79
in the spindle: 7032-0043(M6)
in tailstock quill: 7032-0039(M5)
The diameter of the cylindrical hole in the spindle, mm: 54
The height of the cutter installed in the tool holder, mm: 25
The direct number of speeds of spindle rotation, min: 24
The number of reverse speeds of spindle rotation, min: 12
The spindle rotation speed, Rev/min: 10-1400
The number of steps of feeds longitudinal/transverse, min: 50/50
The feed range, mm/Rev:
longitudinal 0,018-22,4
cross 0,009-11,2
The number of cut threads, at least:
metric: 36
modular: 36
inch: 45
pitch: 45
Rapid travel speed of carriage, m/min:
longitudinal: 4,0
cross: 2,0
The maximum length of travel, mm:
carriage: 900
lower caliper: 280
top of caliper: 130
quill: 150
tailstock (transverse offset): ±15
The maximum angle of rotation of the upper carriage, deg: ±90
Price of one division of the scale movement, mm:
carriage: 1,00
lower turret: 0,05
top of caliper: 0,05
quill: 5,00
Price of one division of the scale turning the top of the caliper, hail: 1.00 to
The surface roughness of the workpiece made of structural steel with finishing grinding, mm:
Machine dimensions VH, mm
length: 2800
width: 1190
height: 1450
Weight of the machine WH, kg: 2450
over bed: 445
over carriage: 220
above the recess in the frame: 620
Maximum length of workpiece, mm:
over cross slide: 1000
above the recess of the bed: 290
above the recess of the frame when mounted on the faceplate: 240
Maximum turning length, mm: 900
The spindle end flange GOST 12593-72: 6K
The centre according to GOST 13214-79
in the spindle: 7032-0043(M6)
in tailstock quill: 7032-0039(M5)
The diameter of the cylindrical hole in the spindle, mm: 54
The height of the cutter installed in the tool holder, mm: 25
The direct number of speeds of spindle rotation, min: 24
The number of reverse speeds of spindle rotation, min: 12
The spindle rotation speed, Rev/min: 10-1400
The number of steps of feeds longitudinal/transverse, min: 50/50
The feed range, mm/Rev:
longitudinal 0,018-22,4
cross 0,009-11,2
The number of cut threads, at least:
metric: 36
modular: 36
inch: 45
pitch: 45
Rapid travel speed of carriage, m/min:
longitudinal: 4,0
cross: 2,0
The maximum length of travel, mm:
carriage: 900
lower caliper: 280
top of caliper: 130
quill: 150
tailstock (transverse offset): ±15
The maximum angle of rotation of the upper carriage, deg: ±90
Price of one division of the scale movement, mm:
carriage: 1,00
lower turret: 0,05
top of caliper: 0,05
quill: 5,00
Price of one division of the scale turning the top of the caliper, hail: 1.00 to
The surface roughness of the workpiece made of structural steel with finishing grinding, mm:
Machine dimensions VH, mm
length: 2800
width: 1190
height: 1450
Weight of the machine WH, kg: 2450
