pnevmaticheskie loader,material handler" hornet"

technical characteristics

 

 

 

 

 

 

name characteristics

the value

General characteristics

tTransportRule materials, the permissible dimensions, mm

- cereals;

- products of waste (cleaning) grain cultures (sunflower husk, cereals, etc.);

- sawdust and woodworking woodworking production;

- chips of wood and woodworking timber production (with the restriction on the size of individual single particles);

 

anduse the equipment for transportation of sand, cement, crushed stone, gravel and other abrasive materials as well as materials with a bulk density ρ=1600 kg/m3 not allowed.

 

without limiting

without limiting

 

without limiting

 

with the restriction

(the size of a single particle: diameter not exceeding 20 mm,

length 80 mm)

pcapacity on the overload of material for 1 hour of basic time, t/hour (grain), not less;

- maximum reached, t/h.

 

30

32

mAssA install without spare parts and package, kg, not more

~1000

ggabaritnye dimensions, mm:

- in working position (length × width × height);

- in transport position (length × width × height).

 

3700×1640×5010

3700×1640×2400

dorogeny the lumen when transport, mm, not less

200

 height the flow of the transported material, mm, not less

4500

the direction of discharge

N.Azad, left, right

the drive:

a) electric

 - the electric drive motor of the turbine:

    power, kW

    the frequency of rotation on the shaft, min-1

 - the motor drive shutter

    power, kW

    the frequency of rotation on the shaft, min-1

 

 

b) mechanical (PTO tractor)

    - power, kW

    - the PTO rotational speed, rpm

(requires the use of drive pulleys certain diameters)

 

 

 

30

3000

 

5.5

1500

 

 

 

not less than 30 kW

540 or 1000

 

xharakteristika working bodies

inair part – blower (turbine)

the fan type;

- diameter of impeller, mm;

- the width of the impeller, mm;

- the number of steps, pieces;

- number of blades, PCs;

- height of blade, mm.

- the number of revolutions of the impeller, Rev/min, maximum value;

- diameter of the suction pipe to the cyclone, mm;

- diameter of the suction pipe to the blower, mm;

- cross-section of the delivery channel (rectangular cross section), mm

 

centrifugal

630

90

2

12

75

3000

200

200

162×182

inair part – air shutter

the fan type;

- diameter of impeller, mm;

- the width of the impeller, mm;

- the number of impellers, pieces;

- number of blades, PCs;

- height of blade, mm.

- the number of revolutions of the impeller, Rev/min, maximum value.

 

centrifugal

500

400

1

9

200

40