The milling machine FSS-3
Sell Milling machine for wood FSS-3 b/Stankostroitel plant (Dnepropetrovsk) 2001 in good fully working condition, missing the left extension plate desktop. Location Kyiv region.
Woodworking milling machine FSS-3 is designed for milling the wood with both manual and power feed, sartania spikes, and also for curved moulding pattern, has a tilting spindle that allows you to set the machining tool at an angle up to 45 degrees. Table size (2000 x 1900 mm) with a lengthening and extension allows you to process large workpiece. The spindle has a bearing on the superior bearing without transitional bar that allows the use of a machine of this model in the lines of jointing.
Specifications:
Maximum thickness of the workpiece 100 mm
The greatest width of the workpiece, mounted on a tenoning
the carriage with the depth of the spike 100 mm 450 mm
Table dimensions: length 1000 mm, width 800 mm
Table dimensions with extension and expansion 2000х1900 mm
The angle between the working surface of the table and the spindle 45-95 deg.
Table height over floor 860 mm
Rotation frequency of spindle: 3000/4500/6000/9000 rpm
The greatest relative vertical movement of spindle 100 mm
The diameter of the neck spindle tool 32 mm
The greatest diameter of the cutting tool 250 mm
The maximum height of the cutting tool 110 mm
Stroke tenoning carriage 600 mm
Power of motor for spindle drive 4,25 kW
The required performance of the exhaust device, not less than 1350 cubic meters/hour
Dimensions:
length (with extension table) 2000 mm
width (with extension table) mm 1900
height 1600 mm
Machine weight 660 kg
Price: | 5 000 UAH |
Seller: | dmitrij ivanov |
Phones: | 0930054492 Show phone |
Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |