Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  mining and quarry equipment

Sell hydraulic pusher motor TGM-1,TGM-4,TGM-6,

Offer type: salePublished: 26.11.2016
Seller:Kravchenko Oleg
Phones:
Show phone
Write a message
Address:Ukraine, Donets'ka Oblast'
The PUSHERS of the HYDRAULIC MOTOR of TGM-1, TGM-2, TGM-3, TGM-4, TGM-5, TGM-TGM 6Толкатели hydraulic motoris designed to control shaft mechanisms with a reciprocating and swinging movement. When the power of the pusher rod it under the force controlled mechanism returns to its original position.

Followers of TGM can be used in mines, dangerous on gas explosion and coal dust on the surface under the canopy in such conditions:
- ambient temperature from -40 to +45° C;
- relative air humidity up to 100% at temperature 35° C;
- atmospheric pressure from 84 to 106 kPa (630 to 800 mm Hg. calendar);
- dust content up to 1600 mg/m3;
- vibration installation with a frequency of 5 to 120 Hz;
- with a maximum displacement of 0.25 mm at a frequency of 45 Hz and a maximum vibration acceleration 20 m/S2 at a frequency of from 45 to 120 Hz.

The principle of action of the pushers of TGM is to create a pressurization of the working fluid by rotation of a gear 'pump, which does the moving of the push rod, and when the power of the motor is the return of the rod under the action of congresa or controlled mechanism to its original position.

Mount pushers TGM is performed by means of a lateral hinge supports. The design of the lifters allows the possibility to maintain them both in vertical and in horizontal position or any intermediate 0 to 95° C.