Compressor Intertool PT-0052
Offer type: salePublished: 26.11.2016
| Price: | 45 000 UAH |
| Seller: |  Il'enko Aleksej |
| Phones: |  (050) 260-57-05 Show phone |
| Address: | Ukraine, Kyiv |
SPECIFICATIONS AND DOCUMENTATION INTERTOOL PT-0052
Type of motor asynchronous three-phase
The number of 3 cylinders, steel
Supply voltage 380 V
Power 20/15000 Hp/W
Working pressure 8 ATM
The volume of the receiver 300 l
The performance of 2000 l/min
Drive type belt
The tube diameter of 10-12 mm
12 month warranty
The weight of 440,000 kg
The volume 1,500000 m. cube
Piston air compressor PT-0052 is intended for compressed air supply of pneumatic equipment in the plant and in the workshops. The compressor has a powerful engine, consuming 15 kWh of electricity with voltage of 380 V. the compressor capacity is 2000 l/min at 8 psi working pressure. With such performance the compressor can safely connect multiple pneumatic tools at the same time. The compressor has a modern W-shaped head with three steel cylinders. Due to this arrangement of the cylinders is much saved the area occupied by the pump of the compressor. Each cylinder has intake filters that periodically need to clean.
Features
Professional compressor;
Asynchronous three phase;
W-shaped engine;
3 steel cylinder;
Direct output from the receiver with the ball valve;
Automation;
Emergency relief valve;
The compressor has a belt drive, which ensures smooth running and minimum noise in operation. Piston group performs translational motion due to the rotation of the crankshaft, which is connected with the pulley of the impeller. It is known that the friction force causes the mechanisms to bask. So here is the impeller acts as a cooling element, not allowing to overheat the pistons and rings. The impeller is driven with rotary motion through the belt drive which connects the motor pulley with a pulley of the impeller. This type of transmission reduces the vibration and prevents overheating of the mechanism of friction.
A large volume of the receiver is, above all, profitability. The main task of the receiver is the creation of a supply of compressed air and smoothing the ripple. The volume of the receiver 300 l in compressor PT-0052 provides high efficiency of operation and accumulates a large amount of air for the consumption of large pneumatic cylinders. The compressor has fully automatic launch. Emergency relief valve makes the compressor the most safe to use. The compressor is equipped with three exits - two at the top of the receiver and third straight in the receiver with the ball valve. Job site compressor can be configured as stationary and to move thanks to 4 wheels.
Type of motor asynchronous three-phase
The number of 3 cylinders, steel
Supply voltage 380 V
Power 20/15000 Hp/W
Working pressure 8 ATM
The volume of the receiver 300 l
The performance of 2000 l/min
Drive type belt
The tube diameter of 10-12 mm
12 month warranty
The weight of 440,000 kg
The volume 1,500000 m. cube
Piston air compressor PT-0052 is intended for compressed air supply of pneumatic equipment in the plant and in the workshops. The compressor has a powerful engine, consuming 15 kWh of electricity with voltage of 380 V. the compressor capacity is 2000 l/min at 8 psi working pressure. With such performance the compressor can safely connect multiple pneumatic tools at the same time. The compressor has a modern W-shaped head with three steel cylinders. Due to this arrangement of the cylinders is much saved the area occupied by the pump of the compressor. Each cylinder has intake filters that periodically need to clean.
Features
Professional compressor;
Asynchronous three phase;
W-shaped engine;
3 steel cylinder;
Direct output from the receiver with the ball valve;
Automation;
Emergency relief valve;
The compressor has a belt drive, which ensures smooth running and minimum noise in operation. Piston group performs translational motion due to the rotation of the crankshaft, which is connected with the pulley of the impeller. It is known that the friction force causes the mechanisms to bask. So here is the impeller acts as a cooling element, not allowing to overheat the pistons and rings. The impeller is driven with rotary motion through the belt drive which connects the motor pulley with a pulley of the impeller. This type of transmission reduces the vibration and prevents overheating of the mechanism of friction.
A large volume of the receiver is, above all, profitability. The main task of the receiver is the creation of a supply of compressed air and smoothing the ripple. The volume of the receiver 300 l in compressor PT-0052 provides high efficiency of operation and accumulates a large amount of air for the consumption of large pneumatic cylinders. The compressor has fully automatic launch. Emergency relief valve makes the compressor the most safe to use. The compressor is equipped with three exits - two at the top of the receiver and third straight in the receiver with the ball valve. Job site compressor can be configured as stationary and to move thanks to 4 wheels.
