Blocks of ten

Blocks of ten

Block heater (TANB), as well as Section ten (CMEA Section Elektrovagonoremontny) is a structure of several dvuhkonusnyh of tubular electric heaters is mounted on a common threaded or clamping flange for later mounting them in industrial settings. In the flange can be placed the seat for the temperature sensors, the anodes and other devices.

For more information, please look at the website http://ten-tena.com.ua

 Blocks of ten. Section ten. Section elektrovagonoremontny - SEV.

Block heater (TANB), as well as Section ten (CMEA Section Elektrovagonoremontny) is a structure of several dvuhkonusnyh of tubular electric heaters is mounted on a common threaded or clamping flange for later mounting them in industrial settings. In the flange can be placed the seat for the temperature sensors, the anodes and other devices.
The heating elements are electrically isolated from each other, which allows when operating equipment to apply various circuit elements (star, triangle). Ten blocks can be used in different environments, form and flange dimensions is often individualized.

Rated input power block heater is selected from a range according to GOST 13268-88.

Specific heat flow from the surface to 15 W/cm2.

TANB are produced at the nominal voltage 220/380 V.

Block heating elements are welded to the flange argon-arc welding. The flanges are made of stainless steel or steel 10, 20. Nominal thread size flange in inches - G 11/2" G... 3".

These parameters may be supplemented or be changed by agreement with the customer.

On customer request, block heater can be arranged in a spatial configuration.

We can:

· Offer from a warehouse TANB and the CMEA standard.

· To manufacture blocks according to customer's drawings.

· To develop a block design according to Your technical task.

The most common use the blocks to heat liquids and oil in water heaters steam generators, boilers and other industrial and domestic installations. In this often abbreviated as CMEA –section elektrovagonoremontny, which is screwed in the second nut located on the container so the heating elements are immersed in a liquid ,and electrical heaters is from the outside of the tank. It's fast, convenient, safe.

The following is a basic diagram and photo of the CMEA

L - planting block size
D - diameter of the heating element
M - thread size flange
h - thread length flange
H - flange thickness
S - size hex

Example of designation TANB:

Produce blocks of tubular electric heaters of various sizes and capacities. Produce a block heater on flange thread: 1 ¼ inch; 1½; 2; ½ 2 , the flat flanges of different forms.
Flange material : steel ,stainless steel, brass
The tan material: black steel or stainless steel.

The company accepts orders from customers for other versions and options TANB specifically for every setup.

Warranty - 1...12 months, provided compliance with the rules of transportation, storage, installation and operation.

Standard operating conditions

the working environment temperature not more than 600°C;

type of climatic performance UHL 4 according to GOST 15150-69;

the environment is non-explosive, with a valid the content of aggressive gases, vapors and dusts in concentrations not exceeding established by GOST 12.1.005-88;

the type of protection against electric shock the electric current corresponds to a class 0 or I according to GOST R IEC 536-94.

The heating elements are electrically isolated from each other, which allows when operating equipment to apply various circuit elements (star, triangle). Ten blocks can be used in different environments, form and flange dimensions is often individualized.

Rated input power block heater is selected from a range according to GOST 13268-88.

Specific heat flow from the surface to 15 W/cm2.