Battery Heating Elements
| Price: | 200 UAH |
| Company: | FOP Arzamasov |
| Seller: |  Strel'chenko Sergej Aleksandrovich |
| Phones: |  050-570-5905 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
The use of heating elements as a fundamental element of some heating systems have become popular recently. Today is the time from time you can see the advertising, which States that heating element for radiators provides a great opportunity to save money and get even better heating than a gas.
For more information, please look at the website http://ten-tena.com.ua
Heater can be installed in any device having internal cavity filled with liquid. Also some craftsmen started install the heater in a cast iron battery, it is assumed the internal convection the heat transfer fluid that is heated rises up, cold goes down. If you fill the radiator with antifreeze high viscosity, such a device you can set, say, in the garage, inside of which the temperature in winter can reach sub-zero values. If you want to arrange an additional heat source in a private house or, for example, in the housing of the apartment type, you can use ordinary water as the coolant. The installation of the Heater in the radiator justified in the following cases:
· creating the heating system in terms of the distance from Central gas pipeline (in this case you will need the charging of battery with thermostat);
· if you have an electric boiler, then the installation of the heating elements to the radiator enables you to optimize the heating system;
· electric heating elements in the battery design require significantly less time to warm the room, therefore, justified the use of the premises, from time to time you need to quickly and reliably warm.
To increase the long life of the heaters, should be avoided incorrect choice and right to install and operate device.
How to choose electric heating elements in the battery? The most important condition for life and quality operation is the correct selection of metals, of which made ten. In liquid medium is most productive and advantageous to use tubular heaters, made of stainless steel or copper, because they resist corrosion and withstand high temperatures. It is very important point is the choice of coolant is best to use distilled water with a minimum amount of impurities, so that in the course of heating the coating heating element not formed solo deposits (scale). Should pay attention to type of outlet. Models with power up to 3 kW can be connected into a common network 220V, but if you want to install a more powerful heating system, you will have to conduct a three-phase network 380V or you can face the problem Overdrive network. It is also advisable to purchase a heater for battery heating thermostat, as this will significantly improve the comfort from operation. Heater without a thermostat will operate at maximum power and it will only turn off when it gets hot. This will lead to additional electricity costs and discomfort in the home. The presence of the thermostat will set the desired temperature and relax immersed in their own business
