Bath long pasteurization SDT-600 (600 liters)
Offer type: salePublished: 22.11.2017
| Price: | negotiated |
| Seller: |  Yurij |
| Phones: |  0663813100 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
Bath long pasteurization is intended for heat treatment with stirring milk, dairy blends, dairy by-products.
Bath consists of the following main components: bathtubs, piping and control Cabinet.
Bath long pasteurization consists of an inner stainless steel bath contained in the housing and the outer lining.
Bathtub placed under internal steam distribution head, to which is supplied through the conduit pairs.
Of double wall fuel storage space is displayed down the pipe for water drainage. To it is attached the valve and the pipe feeding the cold water. To maintain a constant water level in the interwall space serve as the overflow pipe.
Stirring the product in the tub long pasteurization is carried out by a stirrer rotated by a motor-reducer. Change control of product temperature, water interwall space is performed by using thermometers.
Bath consists of the following main components: bathtubs, piping and control Cabinet.
Bath long pasteurization consists of an inner stainless steel bath contained in the housing and the outer lining.
Bathtub placed under internal steam distribution head, to which is supplied through the conduit pairs.
Of double wall fuel storage space is displayed down the pipe for water drainage. To it is attached the valve and the pipe feeding the cold water. To maintain a constant water level in the interwall space serve as the overflow pipe.
Stirring the product in the tub long pasteurization is carried out by a stirrer rotated by a motor-reducer. Change control of product temperature, water interwall space is performed by using thermometers.
- capacity three-ply 600 l (geom.) with thermal insulation, conical bottom, heating elements 45 Il for your order kW (9x5 or 3х15 kW);
- overflow pipe, 1/3 of the lid lift;
- the TSM sensor with the product;
- stainless steel faucet DN50;
- mixing device frame type with Teflon scrapers;
- gear motor 1,5 kW, 28 rpm, with ground reference node;
- remote control, including 2-or 1-channel meter controller;
- the starter mixing device;
- protection of heating elements;
- electromagnetic valve on the steam inlet;
