Flow meter RS-7 (RM-40 goose)
| Price: | 2 500 UAH |
| Company: | Lispriborservis |
| Seller: |  Ivan Valer'evich |
| Phones: |  +38-095-818-64-53 Show phone |
| Address: | Ukraine, Luhans'ka Oblast', Syevyerodonets'k |
Rotameter - flow meter constant differential pressure float freely in the body of the instrument. Consists of mounted in the housing cone (rotametricheskoy) tube, which moves inside the float.
The flowmeters type RS with local readings of the glass tube rotometrics designed to measure the volumetric flow smoothly varying uniform flow of clean and low contaminated liquids with dispersed inclusions of foreign particles, as well as for the volumetric flow measurement of air and gases.
Scale readings of the conditional is uniform, applied directly to rotametricheskuyu up. Countdown evidence produced by the upper edge of the float.
Fluid pressure must not exceed 6kgs/cm2 (0.6 MPa).
Flowmeters are designed to operate at the temperature measured and ambient environment from 5 ° C to 50°C, ambient humidity from 30% to 80%.
The basic permissible error rotameters is ±2.5% of upper limit of measurement.
Calibration of rotameters - individually made by the manufacturer on water or air. For other environments, it is necessary to recalculate the flow of water or air at a given liquid or gas.
Technical characteristics of the devices rotameters RS-7.
The upper limit of measurement - 40m3/h;
Material floats instrument rotameter RS-7 - alloy Д1Т;
The material of the inner reinforcement - steel 12X18H9T;
Conditional pass - 40mm;
The connection device rotameter RS-7 with the pipeline - flanged;
Dimensions - 696х160мм;
The mass flowmeter device RS-7 - 6.8 kg.
In stock - 1pc.
