5Д32 Machine vertical hobbing machine for cylindrical gears

Machine 5Д32 vertical gear hobbing machine designed for cutting spur gears with straight and slanted teeth and for cutting worm wheels as by radial or by tangential feed. In the presence of special devices it is possible to cut gears with internal gear. The workpiece or set of workpieces simultaneously is mounted on the mandrel in the spindle of the table, and the larger size of the wheels directly on the machine table. A hobbing cutter and the workpiece is forcibly misleading rotational movement with such angular velocities that they would have being in the actual engagement. When cutting wheel with straight teeth the spindle of the milling caliper is mounted at an angle to the horizontal plane equal to the angle of helix of the worm cutter. For cutting wheels with slanting teeth of the milling spindle headstock is mounted at an angle equal to the sum or difference of the angles of inclination of the teeth of the wheel and the helix of the cutter depending on the combination of directions of helix of teeth and turns of the bit. The cutting of cylindrical gears is done with a vertical feed milling caliper. To enable the milling wheel associated method using machine model 5Д32 load provided by the hydraulic device. Max. module cut wheel for steel, mm 2...6. The largest diameter of a cut cylindrical spur wheel (0°), mm: 800. The largest diameter of a cut helical spur gears (30°), mm: 500. The largest diameter of a cut helical spur gears (60°), mm: 190. Table diameter, mm: 475. The motor of the main drive kW 2.8. Overall dimensions of machine (length x width x height), mm: 2395 x 1210 x 1975. Weight of machine with electrics and cooling, kg: 3660. Good condition, little exploited. Complete. Also, there are sales others gear cutting machines: 5A-12, 5122, 5П23БГ. Location: Kiev. More information at: http://marketstan.all.biz http://marketstan.com.ua http://marketstan.com