The longitudinal-transverse cutting of metal
Offer type: salePublished: 01.12.2018
| Price: | negotiated |
| Company: | SavVATS OOO |
| Seller: |  Inna Alekseevna |
| Phones: |  +38 044 2016109 Show phone |
| Address: | Ukraine, Kyiv Oblast' |
The longitudinal-transverse cutting of metal is one of the types of processing of steel coils which is carried out with special lines. When cross cutting, the roll is cut into sheet, and the longitudinal dissolution is for strip
(band) or tape.
Cutting of rolled metal on the factory Savvats is carried out using 3 lines, slitting
- Line slitting Samesor (thickness 0.5 - 2 mm.)
- Line of longitudinal-transverse cutting Swats (thickness 2 - 5 mm.)
- Slitting unit Savvats (thickness 3 to 8 mm.)
We carry out cutting of rolled metal with our own and with raw material, stamped steel 3PS (S235JR), 08RG (51ДХ), S355, 09G2S.
Of the workpiece obtained after slitting is used:
- for roofing installation
- for the construction of industrial structures
- for heating and ventilation systems
- for the manufacture of stamping products
- for the manufacture of metal advertising stands
The company Savvats is a large plant for the production of metal and metal products, as well as this service metal center with different types of metals. Our company has many years on the market, which in turn allows to achieve the maximum product quality and an automated production process.
The company has the facilities which allow:
- to perform large volumes in a short time
- to work with their raw materials and raw materials of the customer
- to deliver its own service delivery throughout Ukraine
- to manufacture most types of metals in one place
We are located in Kiev, near the Vydubychi
