Jointer Stomana DMA 41L / 53L. Surface planer
Offer type: salePublished: 05.11.2019
| Price: | 4 870 EUR |
| Company: | BK Tehnologicheskoe BYuRO |
| Seller: |  TEHBYuRO Stanki Derevoobrabotka |
| Phones: |  +380444905550 Show phone |
| Address: | Ukraine |
Machines equipped with cast iron tables with ground surface to provide easy movement of the workpiece. The desktop size:
DMA 41L: 2650x410 mm
DMA 53L: 2900х540 mm.
Planer tables the machines are configured depending on the thickness of the removed layer can be locked in adjusted position. The front Desk has a limiter, which allows the work surface drops below the highest point of the shaft.
The maximum layer of material which can be removed in one pass is 8 mm.
In packaging machines of the aluminum line size 1500х155 mm with the possibility naclonal 90° to 45°.
Machines equipped with one-speed motor, DMA, 41L capacity of 4 kW, and DMA 53L – 5.5 kW and balanced knife shaft ø 125 mm with four blades.
The maximum shaft speed is 4700 rpm.
Engine stop occurs with electronic brakes.
The machine is equipped with protection against voltage drop and protection of motor against overloads.
The cutter block is protected, which can be adjusted depending on the width of the workpiece. Part of the knife roller, which is not used, remains closed for greater safety at work.
Under the shaft located in stroikombinata with a pipe diameter of 160 mm for connection to the aspiration system.
The control panel is rendered and set at eye level for ease of management.
-----------------------------------------------
DMA 41L: 2650x410 mm
DMA 53L: 2900х540 mm.
Planer tables the machines are configured depending on the thickness of the removed layer can be locked in adjusted position. The front Desk has a limiter, which allows the work surface drops below the highest point of the shaft.
The maximum layer of material which can be removed in one pass is 8 mm.
In packaging machines of the aluminum line size 1500х155 mm with the possibility naclonal 90° to 45°.
Machines equipped with one-speed motor, DMA, 41L capacity of 4 kW, and DMA 53L – 5.5 kW and balanced knife shaft ø 125 mm with four blades.
The maximum shaft speed is 4700 rpm.
Engine stop occurs with electronic brakes.
The machine is equipped with protection against voltage drop and protection of motor against overloads.
The cutter block is protected, which can be adjusted depending on the width of the workpiece. Part of the knife roller, which is not used, remains closed for greater safety at work.
Under the shaft located in stroikombinata with a pipe diameter of 160 mm for connection to the aspiration system.
The control panel is rendered and set at eye level for ease of management.
-----------------------------------------------
Read more:
- on the website: https://tekhno.pro,
- https://www.facebook.com/Tekhno.pro/
E-mail: info@tekhno.pro
